Grettings..
Yes I searched and yes I did find some interesting things but im still scratching my head and open to any ideas or assistance from better searchers then me!
Long story short... the S10 has been some what neglected and hardly ridden in the last 6 months . Recently, my brother in law was taking her around the block and I noticed when he started it up the headlights were not on. Today I tore her down and tried to trace the issue but had no such luck. Below are some key elements.
1. The upper lights in housing turn on.
2. The harness visually appears to be like new with no visual issues.
3. When I flip back and forth between high and low beams on switch I hear what appear to be the relay switching.
4. Bike fires up and runs perfect.
I did not replace the bulbs... I find it hard to believe both would go bad at once but I could be wrong.
I also noticed in another older thread that a guy from Italy with a 12' had similar issue and claims he tightened down a connection and problem went away.. does anyone know what he was referring to?
http://www.yamahasupertenere.com/index.php?topic=16640.0
Any assistance I greatly appreciated and free beer if you stop by!!
::016::
Yes I searched and yes I did find some interesting things but im still scratching my head and open to any ideas or assistance from better searchers then me!
Long story short... the S10 has been some what neglected and hardly ridden in the last 6 months . Recently, my brother in law was taking her around the block and I noticed when he started it up the headlights were not on. Today I tore her down and tried to trace the issue but had no such luck. Below are some key elements.
1. The upper lights in housing turn on.
2. The harness visually appears to be like new with no visual issues.
3. When I flip back and forth between high and low beams on switch I hear what appear to be the relay switching.
4. Bike fires up and runs perfect.
I did not replace the bulbs... I find it hard to believe both would go bad at once but I could be wrong.
I also noticed in another older thread that a guy from Italy with a 12' had similar issue and claims he tightened down a connection and problem went away.. does anyone know what he was referring to?
http://www.yamahasupertenere.com/index.php?topic=16640.0
Any assistance I greatly appreciated and free beer if you stop by!!
::016::