Search results

Installed my PCV and Autotune System back onto my bike after having my Ecu flashed. At Idle seems the AF ratio is hovering around 11.65. Took it for a ride with the AF ratio of 13.00 inputed into the autotune trim table and on checking after the ride the figures had changed dramatically so i did...

Thanks Gents I will reconnect the PCV and Autotune back up on the weekend. What are ideal parameters to have in the Autotune trim table? Stick with 13.2 as before the ECU was flashed or closer to 14?

I have recently had my S10 ECU flashed with ECU Unleashed software. The bike is now performing like a 1200 should and is a joy to ride. Prior to the ECU being flashed I had a Power Commander V with O2 sensor optimiser and Autotune fitted whch made a huge differnce to the tune but did not...

All I can say is unbelievable. I bought mine with 55 000 km on it and now reached 60 000 km. Owning dirt bikes all my life its hard to believe an there is an S10 with >300 000 km on it and still going strong. I change the oil every 5000 km and use Motul only so I am hoping to get to 300 000 km...

Is 60 000 km for a Super Tenere a lot of kilometres to have done on it and at what mileage do the engines start to get tired? What's the highest odometer reading you have heard of and is the bike still purring like the day it was bought?

Well, received my AT 200 Autotune kit today and with a mate who produces welding procedures for our compan,determined there is no way to situate the supplied O2 sensor in a standard S10 exhaust if it needs to be located before the cat converter. Guess I will have to purchase Arrow Headers which...

Hopefully someone else could help me out with pics. Thanks

Hi Tabasco Do you have any photos of one that you have done just to detail the angle and position you install the sensor at. Even better do you have a template to ensure it is done correct. The last thing I want to do is destroy my headers. Did you braze or weld the bung into situ? Thanks

Gents I have traweled this forum and the Internet to research if anyone has installed the Dynajet Autotune O2 sensor into a stock Super Tenere 1200z exhaust header. I have seen it incorporated into the Arrow headers but not stock systems. Please point me in the right direction on this forum or...

Prior to releasing the tensioner I torqued the tensioner bolts to 10nm as mentioned in the OEM manual so was definitely seated before I released it. I did give the guide a further tap with the my hand on the back of a screw driver after releasing initially to ensure it had released as I never...

Has anybody had a slight whirring noise from the engine when cold after installing the 2014 cct. I have fitted the 2014 cct and clutch basket to my 2010. Bike is now heaps quieter but notice a slight whirring noise on start-up when cold and I am thinking the tensioner may have to much pressure...

Would have been good to find out if someone had done the mod on a 2010 ST just to be sure. I have taken the plunge and ordered the parts from Stadium Yamaha so will let all know what the outcome is once fitted. Initialy had really bad chudder which spoilt the ride so much. John (Sharealike) did...

Hey Guys Has anyone fitted these 2014 clutch bits to an Aussie 2010 ST?

Hey Guys Has anyone fitted these 2014 clutch bits to an Aussie 2010 ST?