Search results

We have a winner ::012:: Karson you were spot on. one of the heat wires inside the loom was split just where it exited the rubber of the throttle side grip. Not enough wire to work with to solder back together so I had to cut away the molded rubber where the wire exits the hand grip and solder...

I did not cut open the loom near the grip just took it apart and saw no external damage to it. I will cut it open and see if there is a splice. thx.

Well, still stumped. I used a test light and can find current from the on off switch to the wire bundle plug and back out to the right hand grip plug but nothing seems to be going to the left handgrip plug. I pulled the throttle side off and all wire are good no rips, tears or cuts anywhere...

I installed the OEM grip heaters last year after purchasing the bike. They have worked fine but suddenly stopped working last week. Everything else on the bike is fine. I pulled and inspected all the wires and connections related to the grips, all good. There is no inline fuse in the plug...

PM and email sent. They did not send any with the QRDP. I ordered the boxes back in early Dec. and got the boxes with emailed instructions but the QRDP was back ordered and I just got it. No instructions however. The front spacers seemed too short to mount the rack and I was really wanting to...

I received my QRDP and it had no instructions. if anyone has installed this can you please tell me if the spacers should be two longer and two shorter lengths? I think I get how to mount it but all the spacers I received are the same size. Since the holes toward the front of the rack are...

Thanks guys, the diagram is helpful.

Adding accessories today and pulled loose the vent and canister hose. Can someone please tell me which hose goes to which tank nipple on the bottom of the tank. I think the canister hose goes on the right nipple for overflow and vent hose on the left but I am not sure. I am assuming left and...

Great! thank you. No there was not one in there but he did send a bunch of spares and two 30 amps are in the package. One more question if anyone knows. I lifted the tank for my grip heater install and the hoses popped off. Should have given some slack first from the bottom I guess. Anyway...

The EB wiring harness has a fuse holder near the + battery terminal. I am electrically challenged, can someone who actually understands electrical please tell me how do you determine the correct size fuse for this harness? Thanks Ron

I have decided on the OEM heated grips after reading many posts. I am finding two part numbers 23-E29A9-V0-00 and 23-E29A0-V0-00. Can anyone tell me the difference? Thanks,