Search results

Paletes3, "cockpit" thanks. Screws not Yamaha, bought at auto parts store as snap connectors. They come in various sizes. Trust the screws to resist vibration better than the snaps. Have to make the cockpit hole larger to give room for the screw to expand the connector. Thanks.

Thanks xsv.

Thanks yoyo.

Added a dash with (left to right): waterproof PIAA Driving Lights switch, panel cutoff switch, 12v cigarette, dual USB with 2.1 amps for each, volt meter, OEM 12v cigarette adapter. Added trim to protect wires and cables from vibrational wear. Photo below.

If you are going places to move the front fender 7.5 inches you deserve to break the driving lights. I have no intention of going such places.

I amstill using the PIAA ST bracket. Myplate just lowers the lights so they sit under the crash bars. Notice in the photos the two sets of holes, one for the original bracket location and thelower holes for the new location. The plate mounts with the original holes and the PIAA brackets mount...

Xsv template added.

It was hand drawn. I will see if I can find it.

The Rumbux Crash Bars will not allow the PIAA ST adapter for the PIAA lights to fit normally. I had to fabricate an extension bracket. See photos. I first created a template and then used ⅛ inch plate steel and a grinder to shape the bracket. I then drilled the holes and spray painted it with...

Thanks AVGeek. I order the connector. Thanks all for your quick responses.

I agree. That is why I used it.

I planned on using tge SAE connectors for all connections. I have not seen an iphone cable with down stepper. Any idea where to get one or what they are called. Will do a goigle search. Thanks.

I am currently using dc to iphone adapter in the dc accessory outlet, but I want to use the PDM60 and let it control the power switching. I am trying to wire it directly using an iphone power cord.

I want to wire an iPhone power cord to my PDM60. I bought a USB/iphone cord and when I opened the wire it has three wires not just a hot and ground. I am not an electrician. Photos attached. One brown, one white, and a wrapped white one in the middle. Which wire is the positive and which is the...

I will look again. I did not see it earlier, I was looking for it from photos in an earlier posting. I have heated grips standard. Thank you, Lloyd

I was going to use that but the 2017 connector had four wire all colored different from the diagram so Iavoided using it.

Me either, thanks again.

I just realized I have been turning the key past lock to parking lights and it triggers. It works fine if I turn the key off or locked. Thanks. Thought I would have to rewire it, but I don't. Thanks. Love the PDM60, it is an easy install.

I installed the PDM60 and used the DC adapter (recommendation from Yamaha mechanic), the problem is the DC line is always hot and not a good trigger location. Any recommendations for a good trigger wire to tap at the front of the bike? I mounted the PDM60 under the upper right side panel so I...

eensreno thanks, that us exactly what I was looking for.