Landon's latest activity
-
LI'd be more concerned about the aftermarket sensor, install a known working Yamaha sensor before changing other parts. And I agree with...
-
LWhat happens when the Mc Cruise is completely removed and put back to factory stock ?
-
LLandon replied to the thread McCRUISE fitted today but have issues.I went back and re-read your last post. I took it that when the McCruise was disconnected the bike ran perfect but when it was connected...
-
LI never expected to have to justify listing a price that was too low. I listed it at $4500 hoping for a quick sale with minimal price...
-
LLandon replied to the thread 2013 SUPER TENERE FOR SALE.No need to justify, its a fair price. I agree with your statement that there are a lot posted for 5-6k and they are not selling. Gen 1's...
-
LLandon replied to the thread McCRUISE fitted today but have issues.Your best bet is to speak to McCruise directly. I'm guessing that during the install that some of the wiring was done incorrectly. Its...
-
LLandon replied to the thread Valve adjustment - more lessons learned.It happens. I came to realize it really wasn’t that bad. People pull the camshafts all the time to adjust valve shims or replace the cam...
-
LLandon replied to the thread Valve adjustment - more lessons learned.As much as I stressed about this it wasn’t that bad to correct. Pulled the camshafts, turned the crankshaft to the right position, put...
-
-
LIf you marked the cams and chains while in the wrong position, I would hesitate to lock it back down in that position. I rotated every...
-
LThat's my video. If all the marks line up and you don't move the crank you should be good, but like I say in the video it's sort of a...
-
LThese marks on the cam chain sprockets need to be horizontal to the case on the "outside"... the opposite of what they are now.... I...
-
LLandon replied to the thread Valve adjustment - more lessons learned.Not trying to sound dumb, just being overly cautious. On Page 5-19 of the SM it says when installing the camshafts to align the K mark...
-
LLandon replied to the thread Valve adjustment - more lessons learned.You made me feel better knowing I’m not the only one to ever make this mistake! In This YouTube how to he marks the chain down by the...
-
LLandon replied to the thread Valve adjustment - more lessons learned.I screwed up and am looking for you guys to reassure me that what I believe my fix is correct. I had an exhaust valve out of spec and an...
-
-
LLandon replied to the thread Camshaft cap torque sequences.Thanks guys. I’ll follow the tip and go evenly.
