Updated - Sargent front and passenger seats, SW Motech GPS mount (Gen 1 S10)

Sckill

Member
Joined
Dec 15, 2013
Messages
140
Location
NJ
My 2012 Super Tenere has been sold and I'm selling many aftermarket accessories. Prices are in USD and buyer covers shipping. I'm located in North NJ and local pickup available as well.

$400 - Sargent world sport performance seats for both rider and passenger. Seats are in great condition with no rips, tears, or scratches and made it possible to do a cross country 2 up trip in comfort.

$15 - SW Motech shock absorbent GPS mount

SOLD - Givi Trekker Outback side racks, 37L left side case, and 48L right side case. Includes interior bags. Cases have silicone applied along seams and rivets to ensure full waterproofing while riding.
SOLD - Altrider skid plate. Used mostly on gravel roads only. Small crack fixed on one of the mounting brackets.
SOLD - Altrider rear luggage rack. Includes hardware to attach Givi monokey luggage.
SOLD - Barkbuster storm wrap around handguards
SOLD - Rox 2 inch anti vibe risers
SOLD - Rox 1 1/4 inch offset risers
SOLD - PIAA 400 mhz and 500 mhz horns. Louder than stock and plug and play.
SOLD - Altrider universal joint guard, brake caliper guard, and enlarged side stand foot.
SOLD - DS Bike tool box.
SOLD - Penske 8987 triple clicker. Shock is sprung for 185lb rider (without gear) and has about 10K miles. Even with luggage and gear, I was able to adjust preload to recommended sag and this shock has greatly improved road handling and compliance.
SOLD - PIAA LP530 LED driving lights. Includes brackets to mount directly beneath main headlights.
SOLD - adjustable brake and clutch levers
SOLD - OEM low seat. Has some foam shaved off to make seat flat
SOLD - Altrider crash bars. These bars are tough and do a great job protecting the tenere. These bars have been tested due to parking tip overs and offroad mishaps, so there are some scrapes and a slight bend at the mounting points, but all mounting points line up correctly to mount on the bike. No cracks on welds. Can be painted over. Ships as one assembled unit and I'm willing to split shipping cost on this one due to large size.







































 
Last edited:

Sckill

Member
Joined
Dec 15, 2013
Messages
140
Location
NJ
Do you have the mounting hardware for both the ALT Rider universal joint & brake caliper guards?
No separate mounting hardware. Those mount using the stock bolts.

Sent from my SM-G991U using Tapatalk
 

Expflier

Member
Joined
Mar 22, 2015
Messages
59
Location
U.S.
I’ll take the following. Send you a pm with my info
thanks


50 - Barkbuster storm wrap around handguards
$50 - Altrider universal joint guard, brake caliper guard, and enlarged side stand foot.
25 - DS Bike tool box.
10 - adjustable brake and clutch levers
25 - PIAA 400 mhz and 500 mhz horns. Louder than stock and plug and play.
 

Sckill

Member
Joined
Dec 15, 2013
Messages
140
Location
NJ
PMs received and I'll get back to you all by tomorrow morning.

Sent from my SM-G991U using Tapatalk
 

DragonDMac

New Member
Joined
Apr 15, 2021
Messages
3
Location
California
PM Sent for:
Givi Trekker Outback cases, racks,bags.
Altrider skid plate.
Altrider rear luggage rack.
Barkbuster storm
 
Top