This is a brand new with tags First Gear TPG Teton jacket and has the latest technology in body armor. Listed below is the description and features. Should you have any questions, please let me know. $200.00 and includes free shipping in Continental US.
BLUE/DARK SILVER/GRAY
SIZE MEN'S X-LARGE
•
d3o™ T3 intelligent shock absorption armor in the shoulders and elbows provides superior protection. Lighter, less bulky, a more comfortable, flexible fit plus the best protection in the industry
•
HYPERTEX™ PLUS waterproof and breathable outer shell material keeps rain outside, but allows inside humidity to escape
•
Outer shell material is 100% 600 denier nylon for abrasion resistance
•
Kevlar® reinforced Teramid® underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road
•
Minimize the heat by utilizing 6 vents–two 9” chest vents with cord locks to securely hold them open for airflow, two 9” sleeve cuff vents with 2-way zippers to regulate volume and two 9” rear exhaust vents
•
YKK® and RiRi® waterproof zippers protect all exterior vents and pockets from moisture
•
For storage there are 2 chest pockets plus 2 front side pockets. Left side contains a port for heated apparel power cord or headphones for your favorite listening device and both pockets contain pull cords to create a wind block around the bottom of the jacket. To release the bungee, unzip the jacket from the bottom up to find the cord locks just inside, key pocket on the left sleeve. All pockets designed to deflect moisture
•
Integrated in the collar is an under-the-helmet rain hood–never again will water run down your neck!
•
Reflective panels on the front, side, arm and back keep you visible at night
•
Adjustable waist and arm straps provide a custom fit
•
3” drop-tail design keeps the jacket from riding up your back
•
The main front, 2-way YKK® zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures. Inside the storm flap on the left side is a security pocket with a red slider for visibility–easy access to storage without having to unzip the jacket
•
When not in use, hang your gloves on the D-ring located below the right front chest pocket
•
To block wind and retain warmth, sleeve cuffs and fleece-lined collar are tipped with neoprene
•
Jacket-to-pant 10” full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants
•
Standalone jacket included as a zip-in liner; fabric is a 3-layer laminate that is water and windproof and micro-fleece lined to retain warmth. For airflow, there are 2 chest vents that line up with the chest vents on the outer jacket.
•
A Firstgear standard: inside every jacket there is a phone pocket on the left side and a map/cargo pocket on the right side. The TPG Teton has these pockets in both the liner and the jacket. So, whether the liner is in or out, the internal pockets are in the same place
BLUE/DARK SILVER/GRAY
SIZE MEN'S X-LARGE
•
d3o™ T3 intelligent shock absorption armor in the shoulders and elbows provides superior protection. Lighter, less bulky, a more comfortable, flexible fit plus the best protection in the industry
•
HYPERTEX™ PLUS waterproof and breathable outer shell material keeps rain outside, but allows inside humidity to escape
•
Outer shell material is 100% 600 denier nylon for abrasion resistance
•
Kevlar® reinforced Teramid® underlay at the crucial first point of contact on the shoulders and elbows to keep your skin safe from the road
•
Minimize the heat by utilizing 6 vents–two 9” chest vents with cord locks to securely hold them open for airflow, two 9” sleeve cuff vents with 2-way zippers to regulate volume and two 9” rear exhaust vents
•
YKK® and RiRi® waterproof zippers protect all exterior vents and pockets from moisture
•
For storage there are 2 chest pockets plus 2 front side pockets. Left side contains a port for heated apparel power cord or headphones for your favorite listening device and both pockets contain pull cords to create a wind block around the bottom of the jacket. To release the bungee, unzip the jacket from the bottom up to find the cord locks just inside, key pocket on the left sleeve. All pockets designed to deflect moisture
•
Integrated in the collar is an under-the-helmet rain hood–never again will water run down your neck!
•
Reflective panels on the front, side, arm and back keep you visible at night
•
Adjustable waist and arm straps provide a custom fit
•
3” drop-tail design keeps the jacket from riding up your back
•
The main front, 2-way YKK® zipper is shielded from moisture by a double storm flap with rain gutter, held in place by spring-snap closures. Inside the storm flap on the left side is a security pocket with a red slider for visibility–easy access to storage without having to unzip the jacket
•
When not in use, hang your gloves on the D-ring located below the right front chest pocket
•
To block wind and retain warmth, sleeve cuffs and fleece-lined collar are tipped with neoprene
•
Jacket-to-pant 10” full conjunction zipper fits easily through zipped liner portal and can be sewn onto your favorite pair of riding pants
•
Standalone jacket included as a zip-in liner; fabric is a 3-layer laminate that is water and windproof and micro-fleece lined to retain warmth. For airflow, there are 2 chest vents that line up with the chest vents on the outer jacket.
•
A Firstgear standard: inside every jacket there is a phone pocket on the left side and a map/cargo pocket on the right side. The TPG Teton has these pockets in both the liner and the jacket. So, whether the liner is in or out, the internal pockets are in the same place
