S10 Dimensions Needed

[Bigguy136]

Hi,
I have my 2014 S10 in South Korea and is being packaged to be shipped back home to USA. The shipping company has a separate company making a pallet and wants to verify dimensions are what they say.
If you have a S10 like below, could I ask for the length, width and height measurements?

Thanks so much.

 

[Muybig]

Bigguy - the 2014 service manual states:
2255mm (88.8 in) overall length
980mm (38.6 in) overall width
1410/1470mm (55.5/57.9 in) overall height NOT sure on why there are 2 measurement's
1540mm (60.6 in) wheelbase

 

[Bigguy136]

Thanks. I used those numbers plus a bit more but I need dimensions per the pics. Panniers add to length and width

 

[EricV]

You might want to tell folks what size your panniers are. Zega panniers come in different sizes. And I'm a little confused that the people with the bike don't just measure it themselves.

 

[Sierra1]

. . . . 1410/1470mm (55.5/57.9 in) overall height NOT sure on why there are 2 measurement's . . . .

Windshield? Up and down?

 

[Bigguy136]

You might want to tell folks what size your panniers are. Zega panniers come in different sizes. And I'm a little confused that the people with the bike don't just measure it themselves.

It is a 3rd party that built the pallet. The shipping company wants to verify the pallet building costs.

 

[Bigguy136]

Windshield? Up and down?

Windshield is down.

 

[Bigguy136]

You might want to tell folks what size your panniers are. Zega panniers come in different sizes. And I'm a little confused that the people with the bike don't just measure it themselves.

I'm not sure what panniers but I thought there was a large and a small in the mega series. Old man memory was something like 45l for large and 38l for small.
I have a CAD model of each pannier that I will check tonight

 

[Bigguy136]

Old man memory is working. I have the 38L/ 45L setup from Touratech. Left side is small pannier at 243MM/ 9.57" (9 9/16) wide and the right side is large at 283MM/ 11.14" (11 1/8) wide. When I modeled the panniers, I wish I would've also set spacing.

Anyone with a similar set-up?

 

[EricV]

I did, but that bike has moved on. The handlebars were still wider than the panniers. I remember measuring so I had an idea of what might scrape first during lane splitting. If the mirrors fit, I was golden. Sorry to not have dimensions for you.