Search results

Just finally got the S10 back together and no leaking weep hole. It really was a simple process once you do one. The several posts that stepped us through the process really helps familiarize us with the job. I used the one that used the screws to remove both the wheel and pinion seal. The...

I am finally in the process of changing the seals (93102-50009-00, 93102-70007-00, 93108-49003-00) and coupling gear (23p-46123-00-00) in the final gear. I there a trick in removing the seal on the drive shaft that goes into the gear coupling? The other seals were easy. I also read in one post...

The oil was just changed twice. The first time I changed it, I thought maybe I had overfilled it. It went on a 5-10 mile run just see if it would leak again. It will leak just sitting on the center stand.

Thanks bimota, I did forget to mention it is a 2014ES and has 40K miles on it.

Just came back from a 9500 miles trip to Alaska. I live in middle Georgia. Me and two other guys trailered our bikes to Cody, Wyoming (2000 miles) and left from there on our journey. Trip went well except for blowing out both front fork seals coming back from Prudhoe Bay. I think it was in...

Where is everyone getting their YAMAHA parts from? Is there someone on this website that is a Yamaha parts dealer? I am looking to replace the TPS on my 2014 S10 ES. Are you ordering 13S-85885-01-00?

Thank you very much wera688. That worked perfect and simple.

Are the pictures that Tremor38 posted at the beginning of this thread still visible and accessible by members. Can't seem to view them. I just came back off a two thousand mile trip to the backroads of Appalachia and my 2014 S10 ES started doing the jumpy throttle thing. After returning home...

Nope, never even think about it.

I shimmed it out with some rubber pieces so it would not rock back and forth.

I ended up purchasing a 24" Madstad and the height is perfect for me. I just wish it was a little wider.

Thanks for the quick replies. The reason I asked was that when I asked Blair from Madstad what this dimension was on the 24" windscreen, he said it was 16". The dimension you both gave me tells me that his dimension of 16" cannot be correct. The GIVI windscreen that is on my bike was originally...

Artemedes, Your 22" Madstad windscreen, what is the distance from the top screw in the windscreen to the top of the windscreen? Trying to get an idea of which screen to order if I go that way. Kind of stuck between the Madstad or Parabellum. Another thing I have seen mentioned, the wind...

Another question for people who have a 2014 or newer S10 with the Gen2 Madstad bracket and using a Parabellum windscreen. Did you have to put more holes in the windscreen or modify the Gen2 bracket? I really want to try a parabellum but Brenda at Parabellum said their windscreens won't fit Gen2...

I just got off the phone with Brenda at Parabellum and she said that their windshield would not fit the Madstad bracket on my 2014 S10. Unless I have read this thread wrong, Badnews has this particular setup. Any feedback?

6'2", 2014 Super Tenere ES When I purchased my S10 it had a Madstad bracket on it. The previous owner had cut 2" off the original 22 " Givi windshield. I am thinking of ordering another 22" to cut down on the wind noise. When you talk about adding a MRA, what are you talking about? I am new to...

Thanks, found it. I had wrote down the wrong part #. Here is a link for two on Amazon Prime for 13.99. https://smile.amazon.com/YAMAHA-OEM-BANSHEE-WARRIOR-GRIZZLY/dp/B07RJ8HBM4/ref=sr_1_2?crid=WMZLS3TKIUN&keywords=22w-24741-00-00&qid=1561330188&s=gateway&sprefix=22w-%2Caps%2C142&sr=8-2

Where in the states are these available? Google could not locate the part number.

Just purchased a 2014 ES and was installing 2 inch Rox Risers and noticed that the brake and clutch lines weren't long enough to allow the front end to turn all the way. I even did the Altrider mod with very little help if any. I saw where Ride on ADV has the longer lines to alleviate the brake...

Barney in Warner Robins, 2014 ES.