Recent content by zoeed

  1. Z

    Issue: Idling at 2500-2900rpm when in gear

    Ooo... I put in a Shorai 18amp couple of months ago. Maybe the battery needs a deep cycle recharge. Btw the thing cleared itself out on my way back. A low battery voltage may have charged one way to work.... I'll need to wait and see what it does in a few hours when I go to work again.
  2. Z

    Issue: Idling at 2500-2900rpm when in gear

    Hi All, I Just got off my bike, after a short ride to work. It had been in the garage for about 20 days. My S10 has been perfect in the 20000miles that I have ridden, until this morning. While in gear, it idles high around 2500-2900 rpm when in gear (all gears) In neutral it would go back to its...
  3. Z

    Airscrew Adjustment to fix off-idle stumble and Throttle Body Sync - w/ pigtails

    I got the four dial version. Didn't know they had one for twins separately. Btw, would I need to make the hose for the left side, as explained in this thread? *thats going to be a pain ::015:: *
  4. Z

    Airscrew Adjustment to fix off-idle stumble and Throttle Body Sync - w/ pigtails

    Hey... Sorry for this stupid Question. I just ordered the bikemaster carb sync tool. Would it work? They don't promote it for fuel i jets so wondering if this unit will work for me.
  5. Z

    Best Aux lights

    Cool... I'm going to have a look at it... Could you post a couple of pics of your setup? I'm thinking of redirecting the PIAA to the lower fork mount up front... Pic attached for reference.... The light bars are super bright... I do night riding... Some highway... Cross country at night...
  6. Z

    Best Aux lights

    Alright alright alright... Disclaimer I'm a Nut when it comes to buying lights for my bike... I just ordered the 530LP kit from PIAA... The mounting is for under the headlights... However, I already have the touratech daytime running lights there... So has anyone installed the 530's in front...
  7. Z

    Is my bike overheating? I see my headers turn red

    SALUTE ::026:: ::003:: ::021::
  8. Z

    Is my bike overheating? I see my headers turn red

    You are right... I have the plugs.. Just ordered the O2 sensor eliminator from Greece on EBay by smart moto... Also ordered The flash relay from CustomLED... So I am just waiting for all the bits to arrive so that I can have them installed in one go.
  9. Z

    Is my bike overheating? I see my headers turn red

    life has moved on from the low quality fuel... Most of the Gilgit Baltistan areas have PSO(state owned fuel company) coverage... Btw, we all know that the s10 run fine on all types of petrol/gas... I mean I use 87RON all the time.. I used the same on my Honda cbr600rr for 50000kms and not a...
  10. Z

    Is my bike overheating? I see my headers turn red

    Okay, so that seems the same here too... So maybe there is nothing wrong... I'm going crazy owning bikes in a country with no back up ::010:: ::010:: ::010:: O well... At least the Himalayans and Karakoram and hindukush are some consolation ::015::
  11. Z

    Is my bike overheating? I see my headers turn red

    So you mean I do it myself?!?!?! I'm completely useless in repairing my bikes... I once changed the oil on my cbr600rr back in 2010... Lol... The mechanic had to retread the oil drain plug area because I tightened it too much.... I stopped doing any mechanical job on the bikes henceforth...
  12. Z

    Is my bike overheating? I see my headers turn red

    Thanks for your support... This was driving me nuts...
  13. Z

    Is my bike overheating? I see my headers turn red

    So a faulty sensor won't generate any fault codes?
  14. Z

    Is my bike overheating? I see my headers turn red

    Roger that.. I ain't doing to it right now.. Went on a 60 mile ride today... Bike is fine on the road... It's running a bit on the hotter end... Will have coolant changed, plugs changed... Then let's see how it performs
  15. Z

    Is my bike overheating? I see my headers turn red

    What about it? I have no error codes... I reckon if the o2 sensor is malfunctioning.. Should I not have an error code for that?
Top