About a month or so ago, I took the plunge and ordered a full Racetech suspension. New front fork internals springs, valves, etc... and a rear G3 shock from them. I recently got the front forks back from a local shop and spent this past weekend putting her all back together. I had taken the...
I have an HID kit and was able to mount all the ballasts and boxes for it tucked up inside the front. It's all underneath the plastic bill thing underneath the windscreen. Part of it fits on either side of the gauge cluster in the space between it and the screen mount (picture). The flat...
The Altrider Uppers come down beneath the headlight. It doesn't allow the piaa headlights to be mounted in that spot right under the headlights. You'd either have to fab a bracket to drop it down a good couple of inches or mount it directly to the Uppers.
I'm in my office now, but when I go...
This exact thing happened to me right after my first service on mine. Spoke came lose, didn't do any damage...this time.
Took it to the dealer, pretty sure they did nothing but put a new one in there. Didn't check the wheel etc... Several thousand miles later right before my next service...
One of the first things I did when I purchased my '13 was change to HID. I had to modify the end cap that goes over the light by drilling a hole in them for the wires. I have yet to replace the bulbs or have any issues for 15k miles. The stock headlights are insanely disappointing when...
I'm fairly certain that my next set of shoes is going to be the Heidenau K60 scouts. Even though I ride like 99% on the pavement, the mileage life of the tires and the offroad performance makes it number one on my list.
::003::
I don't know where you live, but if you are in the Shakopee area, you should swing by Badger Hill Brewing and snag a growler. I like their beer and it's like 10 minutes away from me (convenient beer = the best beer)!
Badger Hill Brewing
4571 Valley Industrial Blvd S
Shakopee, MN
Been there done that with the damn spokes. http://advrider.com/index.php?threads/the-yamaha-super-tenere-xt1200z-big-thread.545850/page-1403#post-26816390
That's my post when it happened. notched out my swingarm, ground an angle on my rim, bored out the spoke hole on the wheel, and scratched...