XT1200z Jack up kit

[DaveTDM]

Got a set of multi position jack up links to try.

Been out with middle setting today.

Bike feels good and smoother.

I'm fairly tall so with high position seat it makes for a comfy ride.

 

[Rasher]

That reminds me, I have a set of 10mm rider links kicking around if anyone in the UK wants them.

They give a moderate 10mm rise which does quicken up the steering noticeably and adds a fair bit of ground clearance, I bought them for two-up touring and they worked well for me, but no longer got the S10 so doing me no good.

£60 new, will take £25 including recorded delivery for anyone on here in the UK.

 

[Paqard]

Got a set of multi position jack up links to try.

Been out with middle setting today.

Bike feels good and smoother.

I'm fairly tall so with high position seat it makes for a comfy ride.

I can't find these for the Super Tenere 1200 on the Projection-racing.com site. Do you have a link? Know if they'd fit the ES model? How much lift at each position?

 

[DaveTDM]

Hi

They're not on the site yet as these were a prototype set sent for trial, a guy I work with swears by them on his tenere and after talking with them and sending pics and measurements etc they sent me some.

The link holes are from 100mm, 95 and 90mm hole centres.

Not sure about actual height of lift but I have it on the middle hole which makes both wheels just touch the ground when on main stand.

not sure about your Es model but if you contact projection I'm sure they will advise.

Hope this helps and sorry for the late reply but been off to Germany on a little tour. ::008::

 

[DaveTDM]

Links are now on their site and EvilBay ::013::

 

[Xt1200zsupertenere]

Looks great ::008::

 

[Xt1200zsupertenere]

http://www.ebay.com/itm/Yamaha-XT1200Z-Super-Tenere-Bigfoot-jack-up-lift-raise-links-kit-3-in-1-2010-on-/252629980149?hash=item3ad1eb93f5:gMkAAOSw4GVYJFG2

 

[DaveTDM]

Yeah that's em ::008::

Mine were all shorter but third setting was too high, bike wouldn't stay up even on main stand ::025::

I replied and now they are stock and 2 settings higher.

They will probably make them custom if you ask.

 

[Jamex1]

Hi guys, how thick are these dog bones/plates?


Sent from my iPhone using Tapatalk