XT1200Z Gas Tank Side Panels, Rear Tank, Fork Tubes, Exhaust Shield, Headlight

[SpeedStar]

All parts still available. Thanks for the support. ::008::

 

[SpeedStar]

Thanks for the continued interest. All parts still available.

 

[twinrider]

In addition to some of the pieces you're currently producing, I'd like to buy protective film for the LCD display as well as the upper part of the tank where my tank bag's magnetic wings make contact (see pic). Would you be able to offer these?

 

[SpeedStar]

In addition to some of the pieces you're currently producing, I'd like to buy protective film for the LCD display as well as the upper part of the tank where my tank bag's magnetic wings make contact (see pic). Would you be able to offer these?

Thanks for the interest Twin, I sent you a PM. Let me know.

 

[patrickg450]

I am interested in some tank guards, I run a mad mounted bag. Dont wanna scratch her up. Still available?

 

[SpeedStar]

I am interested in some tank guards, I run a mad mounted bag. Dont wanna scratch her up. Still available?

Hi, yes I still have everything available. Just let me know which ones you want.
Thanks.

 

[patrickg450]

I already have a lower cover:

 

[patrickg450]

I need something to go between it and the gas cap. I also would like to get a piece that goes above the gas cap.

 

[Bergy26713]

Hi Devin,

As you already know since I sent you an e-mail that I received my tank side panels and rear panel today and love them. Just thought I would post on here so that others will know what a great product you have. I received them FedX in 1 day, and it only took me about a half an hour to put both tank side panels on. I followed your detailed instructions exactly, and they turned out perfect. They are exactly what I was looking for because they don't take away from the look of the bike. Thanks again for responding and getting them to me so quickly. I'm very happy with the end result. It's cloudy here and hard to take a good photo, but I will post one once the sun comes out. My bike is black like the one that you already have pictures of, and the pictures you posted are a good example of how well they turn out.

Dave

 

[SpeedStar]

Hi Devin,

As you already know since I sent you an e-mail that I received my tank side panels and rear panel today and love them. Just thought I would post on here so that others will know what a great product you have. I received them FedX in 1 day, and it only took me about a half an hour to put both tank side panels on. I followed your detailed instructions exactly, and they turned out perfect. They are exactly what I was looking for because they don't take away from the look of the bike. Thanks again for responding and getting them to me so quickly. I'm very happy with the end result. It's cloudy here and hard to take a good photo, but I will post one once the sun comes out. My bike is black like the one that you already have pictures of, and the pictures you posted are a good example of how well they turn out.

Dave

Hi Dave,

Thanks for the kind words! I really appreciate the support.

 

[garnotte]

I live in quebec ( about 3000 miles from California) and I got the parts 36 hours after ordering! Talk about FAST shipping! Nice piece of work with veray detailled installation instruction.

 

[jimbob]

Thanks Devin. Ultra fast shipping and a easy, quick install with your directions. Quality kit and looks completely invisible on my pearl white paint...

 

[Grumpy]

Devin posted them on 28 May from the USA and I received them on 30 May in England. ::012:: Just need time to fit them. I will post my impressions when I do ::008::

 

[Grumpy]

I could not find "de-natured alcohol" or anyone who knows what it is over here, so I went ahead with soapy water only, it did the job. It only took 20 minutes to fit the forks and tank sides. ::008::

 

[yorksman]

Ordered the Exhaust Shield Mask from eBay before I saw it on this forum,arrived in 2 days,simple to install and looks great!

 

[Dallara]

I could not find "de-natured alcohol" or anyone who knows what it is over here, so I went ahead with soapy water only, it did the job. It only took 20 minutes to fit the forks and tank sides. ::008::

Just an FYI for those who run into a similar situation...

"Denatured alcohol" is nothing more than ethanol with some additives to make it unfit to drink. Keeps alcoholics from picking up straight grain neutral spirits off the shelf at the hardware store. The additives are there so it will make one incredibly sick if they do try and consume it. Denatured alcohol seems to be a label somewhat unique to the United States.

When looking for something similar in other countries you might try looking for "Marine Alcohol", or "Methylated Spirits"... Basically anything that can be burned in an alcohol stove, etc.

For future reference simply note that any alcohol, the purer the better, will do.

Hope this helps.

Dallara



~

 

[tpak]

Re: Re: XT1200Z Gas Tank Side Panels, Rear Tank, Fork Tubes, Exhaust Shield, Headlight

Just an FYI for those who run into a similar situation...

"Denatured alcohol" is nothing more than ethanol with some additives to make it unfit to drink. Keeps alcoholics from picking up straight grain neutral spirits off the shelf at the hardware store. The additives are there so it will make one incredibly sick if they do try and consume it. Denatured alcohol seems to be a label somewhat unique to the United States.

When looking for something similar in other countries you might try looking for "Marine Alcohol", or "Methylated Spirits"... Basically anything that can be burned in an alcohol stove, etc.

For future reference simply note that any alcohol, the purer the better, will do.

Hope this helps.

Dallara



~

Also, rubbing alcohol, the kind used in a doctors office will do the trick, the more pure the better. Often found in supermarkets and drug stores in the USA. In Latin America you need to go to the pharmacy.

Sent from my SPH-L710 using Tapatalk 2

 

[rem]

Re: Re: XT1200Z Gas Tank Side Panels, Rear Tank, Fork Tubes, Exhaust Shield, Headlight

Also, rubbing alcohol, the kind used in a doctors office will do the trick, the more pure the better. Often found in supermarkets and drug stores in the USA. In Latin America you need to go to the pharmacy.

Yep ... rubbing alcohol is isopropyl alcohol. Great for cleaning, etc. Should be available just about anywhere in North America ... drugstores, etc. R

 

[Dallara]

Re: Re: XT1200Z Gas Tank Side Panels, Rear Tank, Fork Tubes, Exhaust Shield, Headlight

Yep ... rubbing alcohol is isopropyl alcohol. Great for cleaning, etc. Should be available just about anywhere in North America ... drugstores, etc. R

Grumpy... The guy a few posts back who said he couldn't find Denatured Alcohol, is in the UK.

Just FYI..

Dallara



~

 

[rfulcher]

Will these protective panels work on the new gray bikes with the matte finish?