SpeedStar
XT12 and DL650
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
Vendor
:exclaim: Get your XT1200Z Super Tenere Guards :exclaim:
Fellow Super Tenere owners. I have a few items to offer to protect and farkle your new ride and keep it looking its best.
I have made similar items for V-Strom and KTM owners for years and in my excitement for my new XT12, this is what I have come up with.
I am very pleased with them and hope you like them as well. ;D
XT1200Z Gas Tank Side Panel Guards:
As you probably have already seen, the gas tank side panels are very susceptible to scuffs and scratches from your knees. I made these side panel guards to address this issue.
They are made from a scratch resistant, UV stable, clear 3M Aerospace Urethane protective film specifically made to protect from scratches and abrasions.
The material is very easy to apply and comes with complete installation instructions.
Note that these will work in conjunction with the WaspWorks graphics, or the Tenere dude rear tank guard should you have those on your bike.
Here are the way they will arrive.
This is once installed.
XT1200Z Gas Tank Rear Guard:
I made this to protect the rear area of the Tank from scuffs and scratches from your jacket and to work in conjunction with the Side Panels.
This also allows an area for the WaspWorks graphics.
After installation
XT1200Z Fork Tube Guards:
These are really nice and very helpful. With the nice gold textured fork tubes, they are very susceptible to rock dings and bug guts getting into the textured surface.
This surface makes cleaning the un-protected fork tubes a pain.
These guards go over this area and protect from rocks and other debris dinging the surface but also make cleaning bug guts a snap since it does not stick to the film surface.
Here they are installed on the fork tubes, covering all of the textured area.
XT1200Z Headlight Guards:
These are cut to fit the Super Tenere Headlights perfect which is no easy task considering the contours of the lens.
The material will protect from flying debris, rocks and bugs, stays clear, and is easy to clean.
Here they are installed.
XT1200Z Exhaust Shield Mask:
If you are like many here on the forum that don’t like the look of the giant silver stock exhaust shield and want to improve on the look, take a look at this mask that I made to make the shield blend in better.
This is made of 20mil heavy mask material and is cut to fit the inset just perfect.
It is almost black when installed but in direct sun the silver comes through and really looks nice.
Check it out.
If you would like any of these, please email me at: drcroix at aol dot com
PM here is possible, but it is easier for me to respond right away by email.
I accept Paypal or personal check.
If paying by Paypal, the account is: drcroix at aol dot com
Gas Tank Side Panels are $40 for the set delivered.
Gas Tank Rear Guard is $15 delivered.
Fork Tube Guards are $20 delivered
Headlight Masks are $20 delivered
The Exhaust Mask is $25 delivered.
I ship quickly by Fedex.
These are delivered prices in the States.
Overseas or Canada shipments may be a few dollars more for shipping.
Thanks for the support,
Devin (SpeedStar)
Fellow Super Tenere owners. I have a few items to offer to protect and farkle your new ride and keep it looking its best.
I have made similar items for V-Strom and KTM owners for years and in my excitement for my new XT12, this is what I have come up with.
I am very pleased with them and hope you like them as well. ;D
XT1200Z Gas Tank Side Panel Guards:
As you probably have already seen, the gas tank side panels are very susceptible to scuffs and scratches from your knees. I made these side panel guards to address this issue.
They are made from a scratch resistant, UV stable, clear 3M Aerospace Urethane protective film specifically made to protect from scratches and abrasions.
The material is very easy to apply and comes with complete installation instructions.
Note that these will work in conjunction with the WaspWorks graphics, or the Tenere dude rear tank guard should you have those on your bike.
Here are the way they will arrive.
This is once installed.
XT1200Z Gas Tank Rear Guard:
I made this to protect the rear area of the Tank from scuffs and scratches from your jacket and to work in conjunction with the Side Panels.
This also allows an area for the WaspWorks graphics.
After installation
XT1200Z Fork Tube Guards:
These are really nice and very helpful. With the nice gold textured fork tubes, they are very susceptible to rock dings and bug guts getting into the textured surface.
This surface makes cleaning the un-protected fork tubes a pain.
These guards go over this area and protect from rocks and other debris dinging the surface but also make cleaning bug guts a snap since it does not stick to the film surface.
Here they are installed on the fork tubes, covering all of the textured area.
XT1200Z Headlight Guards:
These are cut to fit the Super Tenere Headlights perfect which is no easy task considering the contours of the lens.
The material will protect from flying debris, rocks and bugs, stays clear, and is easy to clean.
Here they are installed.
XT1200Z Exhaust Shield Mask:
If you are like many here on the forum that don’t like the look of the giant silver stock exhaust shield and want to improve on the look, take a look at this mask that I made to make the shield blend in better.
This is made of 20mil heavy mask material and is cut to fit the inset just perfect.
It is almost black when installed but in direct sun the silver comes through and really looks nice.
Check it out.
If you would like any of these, please email me at: drcroix at aol dot com
PM here is possible, but it is easier for me to respond right away by email.
I accept Paypal or personal check.
If paying by Paypal, the account is: drcroix at aol dot com
Gas Tank Side Panels are $40 for the set delivered.
Gas Tank Rear Guard is $15 delivered.
Fork Tube Guards are $20 delivered
Headlight Masks are $20 delivered
The Exhaust Mask is $25 delivered.
I ship quickly by Fedex.
These are delivered prices in the States.
Overseas or Canada shipments may be a few dollars more for shipping.
Thanks for the support,
Devin (SpeedStar)
