Where to tap into High beam wire to trigger auxilary light?

EricV

Riding, farkling, riding...
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
May 22, 2011
Messages
8,227
Location
Tupelo, MS
Err, right upper fairing from the rider's perspective. ;)
 

Don in Lodi

Well-Known Member
Founding Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Feb 1, 2011
Messages
5,780
Location
Lodi Kalifornia
Not going to pull the plastics off, but I thought it was a yellow wire. All it takes is a sharp pointed test light... probe each wire and cycle the shutter. Pretty quickly done.
 

Csdude34

New Member
Joined
Nov 11, 2017
Messages
3
Location
Boston ma usa
So I looked for that pink wire and I see a pink and white wire and a reddish/black wire.I went with the pink/white wire but I can't get the high density light out of my dual density Denali DX.Any suggestions?
 

WJBertrand

Ventura Highway
Joined
Jun 20, 2015
Messages
4,516
Location
Ventura, CA
Don in Lodi said:
Not going to pull the plastics off, but I thought it was a yellow wire. All it takes is a sharp pointed test light... probe each wire and cycle the shutter. Pretty quickly done.
Yup and make sure the engine as been started or the headlights will be disabled and really confuse you! DAMHIK!
 

jeepinoutwest

Active Member
Joined
Dec 22, 2016
Messages
120
Location
USA
Update: my 2017 s10 was a pink wire. That’s correct. My 2019 is now a BLUE WIRE WITH A BLACK TRACER. There is no more pink wire at all. I can’t speak for 2018s but the wire harness direction and all the colors are different for 2019. This is the wire that powers up when the high beams are on.
42EC3DCD-7233-49C6-8BCB-D21841E8E8A4.jpeg
 

jeepinoutwest

Active Member
Joined
Dec 22, 2016
Messages
120
Location
USA
Can anyone tell me, for the 2023 model year is the high beam trigger wire still blue with a black tracer? Thanks
 
Top