What you did to your Tenere today??!!

[JJTJ2]

Just picked the bike up on Saturday so Sunday was a busy day. It would be easier to say what I didn't do to it....

Added the Safe Turn Signal system
Added a garage door opener that runs of the high beam headlight. So now when I pull into the drive, I flash my headlight and the door opens/closes.
Added a Black Box Aurora power distribution box for accessories.
Added heated gear power lead.
Added SAE lead.
Added T-Rex crash bars and skid plate (these directions sucked)
Added larger GIVI sidestand foot.
Added Altrider top case rack.
Added Storm bag for the space under the rack.
Added Altrider rear brake shield.
Added Altrider headlight shield.
Added LED headlight with larger dust caps.
Added Givi side case rack.
Added screen protector to the display.

I would have added the Altrider universal joint guard but I didn't have a T-50 Torx driver...

 

[MFP]

Added Storm bag for the space under the rack.

Could you please post a pic or link for the under rack Storm bag?
Thanks in advance.

 

[elricfate]

I added a zerk to the shift linkage pivot point. Then I found out that the zerk that I added, since I had to grind it down just a little bit, lost its spring and the ball went right into the channel in the pivot bolt.

So now I'm re-grinding an angled one that has its retention after the elbow.

 

[JJTJ2]

Could you please post a pic or link for the under rack Storm bag?
Thanks in advance.

I had to contact them directly about it. It isn't on their website but they knew exactly what I was wanting. The email addy for them is: brady@stormind.net

These are the pics they sent me.

 

[michał_k]

I changed my Super Tenere with normal suspension to ES. From the outside, old robes but the interior is more noble.
It was a nice feeling to have two queens for a while. Unfortunately one of them had to go to the new owner.

 

[MFP]

I had to contact them directly about it. It isn't on their website but they knew exactly what I was wanting. The email addy for them is: brady@stormind.net

These are the pics they sent me.

View attachment 66206View attachment 66207

Thanks.
Is that bag specific for an ALTRider tail rack or is it one size fits all?

 

[elricfate]

annnd installed.

 

[JJTJ2]

Thanks.
Is that bag specific for an ALTRider tail rack or is it one size fits all?

It appears to be specific for the AltRider tail rack. Shaped just like it.

 

[MFP]

It appears to be specific for the AltRider tail rack. Shaped just like it.

I am running a GIVI tail rack, I just sent an email to Brady to try and get more info/specs.
The bags that attach to the ALTRider crash bars look pretty nice and functional, I may have to buy them.
Thanks for the info.
BTW, what year is your S10?

 

[elricfate]

I made mine face out. Did not want to catch my pants on it. Did that on the shield behind the shifter Once. Almost dropped the bike on me. You will like having it. Just add grease once a year or so no more sticky stuck shifts.View attachment 66215

I just adjusted mine to do the same and then stuck a little vacuum cap over it.

 

[Cycledude]

Nice job on the grease fittings but is there some reason you didn’t just use a straight fitting ?

 

[elricfate]

I added a zerk to the shift linkage pivot point. Then I found out that the zerk that I added, since I had to grind it down just a little bit, lost its spring and the ball went right into the channel in the pivot bolt.

So now I'm re-grinding an angled one that has its retention after the elbow.

Nice job on the grease fittings but is there some reason you didn’t just use a straight fitting ?

Yep.

 

[JJTJ2]

I am running a GIVI tail rack, I just sent an email to Brady to try and get more info/specs.
The bags that attach to the ALTRider crash bars look pretty nice and functional, I may have to buy them.
Thanks for the info.
BTW, what year is your S10?

Brand new 2018. Bought it in December. Dealer gave me free winter storage and I just picked it up on Saturday.

 

[Sierra1]

Sounds like you may have found a good dealership. Many would not have done that for you.

 

[thughes317]

I am running a GIVI tail rack, I just sent an email to Brady to try and get more info/specs.
The bags that attach to the ALTRider crash bars look pretty nice and functional, I may have to buy them.

FWIW, I have both the crashbar bags and the under-rack tail bag...quality stuff from Storm and handy as hell. Crashbar bags hold my water bottles and snacks, my tire repair kit and 12v pump live in the under-rack bag. A casual observer will never even know that rear bag is there: security through obscurity (to a point).

 

[MFP]

FWIW, I have both the crashbar bags and the under-rack tail bag...quality stuff from Storm and handy as hell. Crashbar bags hold my water bottles and snacks, my tire repair kit and 12v pump live in the under-rack bag. A casual observer will never even know that rear bag is there: security through obscurity (to a point).

I reached out to Brady @ Storm and the under tail rack bag is specific to ALTRider tail racks. I am running a GIVI tail rack so I am waiting to find out from Brady if a bag can be made for it.

 

[s.ga.rider]

added a shorai battery

 

[Flashover313]

Installed new Madstad bracket and grey winglets.

 

[Recurveit]

Added green chille uprising luggage system. I dont know if I would like hard panniers. Does anybody remember the pizza hut bag. Still working on how I want stuff packed

Sent from my SM-N960U using Tapatalk

 

[SkunkWorks]

Arrived today.
Will need to remove the skid-plate to install. Hopefully will fit with the T-Rex setup.