Turn signals different from Euro version?

[ptfjjj]

Thanks Paul. I will look forward to hearing how it goes. I did see the post on AdvRider where Bundu said it was a direct plug and play. I guess I will go ahead and order one from CustomDynamics. Thanks for the help.

Devin, I switched relays, and it works fine with the OEM turn signals, so I am betting that it works just fine with the LED's. Take the right lower cowl off by releasing 3 quick fasteners that look like screws, 2 on back edge, and one on front lower. The one on the front upper stays in. Then there are 4 screws to remove the upper cowl and it is also anchored at upper front by two snap fasteners.

The relay is in the top group 2nd from left. Just ease it off of the rubber hanger and unplug. The custom dynamics one just plugs in and I ran the extra wire across the top of the relays and let the new relay hang to the right of the other relays.

Now for the time consuming task of swapping the signal lights.

 

[SpeedStar]

Hi Paul, thanks for the info. I just happened to have been in the garage checking it out and found the relay. Thanks for the help.

 

[Gat]

I used the customdynamics flasher unit instead of the resistors on my LED signals and all is well!