Tip

SHUMBA

Well-Known Member
Joined
Dec 29, 2018
Messages
1,242
Location
ONTARIO, CANADA
I could never remember which button was the Reset and which was Traction Control so I messed around with my paint pen yesterday and found out that the letters on the buttons are recessed. Worked some paint into them, wiped the button off leaving the paint in the letters. Now I can see!
View attachment 55429
What a great idea!!!
SHUMBA

Sent from my SM-T380 using Tapatalk
 

Mak10

Well-Known Member
Joined
Aug 20, 2018
Messages
2,567
Location
SE Idaho
I used white. White matches the other lettering on the dash and controls. If you wanted you could use red on one and white on the other. White is easy to see on my aging eyes.
 

Cycledude

Well-Known Member
Joined
Jan 29, 2016
Messages
3,998
Location
Rib lake wi
Did mine a couple days ago, used a white oil based fine point Sharpie paint stick from Walmart, $2.69 , wiped off the excess with a alcohol swab, turned out nice and very easy to read in daylight now !
 
Last edited:

Cycledude

Well-Known Member
Joined
Jan 29, 2016
Messages
3,998
Location
Rib lake wi
Karl I’ve tried press and hold that doesn’t seem to do anything most of the time, press and release works but it often takes close to 10 tries before anything happens, I suspect something inside the button might have some kind of defect causing it not to work properly.
Am I the only one experiencing this issue with the reset button ?
 
Last edited:
Top