Show Us Your Panniers

TSRBrad

Member
Joined
Aug 9, 2019
Messages
34
Location
Pahoa, HI
Givi Monokey Trekkers. I also used the "Rapid Release" mounting hardware. Installation took all of about 15 minutes.

 

VRODE

Easy Does It
Joined
Aug 7, 2014
Messages
940
Location
Northern Vermont
Sir can I get more info on how you mounted these panniers to the racks? I’m trying to figure the best way to mount tusk panniers to my S10
The SW Motech racks are flat sided and have convenient holes, so I just bolted the panniers to them. The racks can be removed from the bike quickly with 4 quick release screws.
 

Highwayman

Well-Known Member
Joined
Jun 25, 2019
Messages
394
Location
Southern California

KYwoodsrider

Well-Known Member
Joined
Aug 15, 2014
Messages
186
Location
Lawrenceburg, KY
Sir, would love to know how you mounted your GPS

Sent from my LM-Q720 using Tapatalk
I used the Garmin Hard Mount and attached it to a piece of 1/8" aluminum flat bar.
20200813_164050.jpg
Attached the assembly to the Tenere accessory bar with some Billet Industries 1/2" fuel line clamps
20200813_164023.jpg
You may need to file the clamping surface of the billet clamps a little since the bar seems to be slightly smaller than 1/2".
You can make the set up with a hand drill, file and hack saw.
 

SHUMBA

Well-Known Member
Joined
Dec 29, 2018
Messages
1,242
Location
ONTARIO, CANADA
Not sure if I'm posting this in the correct area...but jdomperez wants to know how SHUMBA (me) mounted my hard cases.
These cases are available on Amazon and are completely waterproof!
Please have a look at the pictures
SHUMBA


Sent from my SM-A520W using Tapatalk
 

SHUMBA

Well-Known Member
Joined
Dec 29, 2018
Messages
1,242
Location
ONTARIO, CANADA
Not sure if I'm posting this in the correct area...but jdomperez wants to know how SHUMBA (me) mounted my hard cases.
These cases are available on Amazon and are completely waterproof!
Please have a look at the pictures
SHUMBA


Sent from my SM-A520W using Tapatalk
SHUMBA here,
After having a closer look at the first picture of my pannier install I will do a little self criticism. First up, the hardware that I used was readily available. One meter (3 feet) x 25 mm (1") of aluminum flat bar, 3/16 " or 5 mm thick. You want it to flex a little. 1/4 " or 6 mm bolts and washers and nutz. Some garden tap washers. Simple U clamps (metal)
Had I sprayed everything black it would be far less noticeable. But I am looking forward, so I really don't give a shit...
When I sell my Tenere, in less than 1/2 hour I can easily remove my installation and plunk on the ugly ones (Yammy OEM boxes.
SHUMBA

Sent from my SM-A520W using Tapatalk
 
Top