Shock rebound clicks

[MotoBreath]

Hello from Greece, i went today to adjust the rebound at the shock. Manual say it has 20 clicks and i counted at least 60, How it is possible? What i am doing wrong i cant understand. Model is 2017.

Στάλθηκε από το SM-A750FN μου χρησιμοποιώντας Tapatalk

 

[yen_powell]

Mine is the same. It used to stop at either end, but no longer seems to. Mine is a 2020.

 

[MotoBreath]

Mine is the same. It used to stop at either end, but no longer seems to. Mine is a 2020.

You mean that it has 60 clicks or that first is stopping at 20 clicks and now not. Sorry i didn't understand

Στάλθηκε από το SM-A750FN μου χρησιμοποιώντας Tapatalk

 

[yen_powell]

I mean, I now keep turning it one way or the other and so far haven't reached a stop, maybe 60 would be the limit and I haven't got that far yet. I'm sure I have never forced it past the stop since owning it, it used to work as stated in the handbook.

 

[singletap]

following, mine does the same.....

 

[singletap]

Reading in an other post, that the knob is probably stripped. just ordered an aluminum one.

 

[Bill_C]

Reading in an other post, that the knob is probably stripped. just ordered an aluminum one.

I bought a milled aluminum from Eagle Mike (I think that's the name). Great piece of kit! Guaranteed it won't strip and the clicks are much more "positive" if you know what I mean.

Word of advice, follow the instructions, particularly with regards to using grease to keep the springs and bearings in place as you slip the knob over them... also put a towel on the ground under the bike in case the bearings slip out on their own.

Sent from my SM-S906U using Tapatalk

 

[singletap]

I bought a milled aluminum from Eagle Mike (I think that's the name). Great piece of kit! Guaranteed it won't strip and the clicks are much more "positive" if you know what I mean.

Word of advice, follow the instructions, particularly with regards to using grease to keep the springs and bearings in place as you slip the knob over them... also put a towel on the ground under the bike in case the bearings slip out on their own.

Sent from my SM-S906U using Tapatalk

Thank you for the advice. Eagle Mike is what I ordered.

 

[bimota]

yep stripped knob

 

[AusTexS10]

Thank you for the advice. Eagle Mike is what I ordered.

I don't seem to need it yet, but was getting ready to order one of these from Eagle Mike for when I do and it is shown as Back Ordered.

 

[gv550]

The aluminum knob the Eagle sells is for adjusting spring preload, not rebound damping. There is no fix if rebound damping adjustment fails, you need a new shock.

 

[MotoBreath]

Can someone tell me if he has the same problem if at least rebound is working or not. I don't know if rebound is working too many clicks and I don't know if it is working. Today I counted the rebound clicks and it is around 76

Στάλθηκε από το moto g32 μου χρησιμοποιώντας Tapatalk