cycledelic relic
Well-Known Member
I have a different storage solution for the Super Ten. If you're interested....
Lookin at all the wasted space under my luggage rack plate...I came up with this idea.... A relatively simple solution using a Pelican 1150 case...a Givi M3 series plate ..& the custom bracket I designed
The bracket can also be used in conjunction with some other plate brands as long as they have at least 10.25" of flat width to mount the bracket
As you can see...I have some simple vinyl slides attached to keep the case inside from rattling around. I have used some pins & clips to secure the case. I drilled holes in the Givi plate for the pins. Other options could include locks if you want.
On my installation..I found that my helmet lock tucked in nicely using the Givi's mounting slots for an extra bolting point
Mounting hardware for the custom bracket consists of 4 spacers & 4 bolts.
4 vinyl sliders for case
Hardware to attach the Givi M3 plate (Monokey) or M3M (Monolock) consists of 2 bolts washers & nuts. Thats it
The 1150 Pelican easily holds a cheapo Slime air comp w/string plugs in bag
2 tire plug tools
1 air guage in plastic case
1 fuel siphon hose in bubble bag
1 small box w/fuses..2 multi knifes
Yamaha tool kit w/Givi rack release tool
(a set of jumper cables occupies the orig tool cubby behind side cover)
Lookin at all the wasted space under my luggage rack plate...I came up with this idea.... A relatively simple solution using a Pelican 1150 case...a Givi M3 series plate ..& the custom bracket I designed
The bracket can also be used in conjunction with some other plate brands as long as they have at least 10.25" of flat width to mount the bracket
As you can see...I have some simple vinyl slides attached to keep the case inside from rattling around. I have used some pins & clips to secure the case. I drilled holes in the Givi plate for the pins. Other options could include locks if you want.
On my installation..I found that my helmet lock tucked in nicely using the Givi's mounting slots for an extra bolting point
Mounting hardware for the custom bracket consists of 4 spacers & 4 bolts.
4 vinyl sliders for case
Hardware to attach the Givi M3 plate (Monokey) or M3M (Monolock) consists of 2 bolts washers & nuts. Thats it
The 1150 Pelican easily holds a cheapo Slime air comp w/string plugs in bag
2 tire plug tools
1 air guage in plastic case
1 fuel siphon hose in bubble bag
1 small box w/fuses..2 multi knifes
Yamaha tool kit w/Givi rack release tool
(a set of jumper cables occupies the orig tool cubby behind side cover)
Last edited: