SailorConnor
Member
Anybody had any issues with the immobiliser cable (from bottom of ignition barrel) rubbing on the nut in the photo?
Mine is bar tight on the nut when the bars are turned to the right and has worn through the sheathing and started to split the cables inside.
Cable is routed as per the cable routing section of the workshop manual, and there isn't any slack to cable tie out of the way.
Thanks,
Con
Mine is bar tight on the nut when the bars are turned to the right and has worn through the sheathing and started to split the cables inside.
Cable is routed as per the cable routing section of the workshop manual, and there isn't any slack to cable tie out of the way.
Thanks,
Con