Pillon grab rail spacing?

Nsrider

New Member
Joined
Mar 6, 2023
Messages
25
Location
Nova Scotia
Can someone with a Gen2 measure the distance between the pillon grab rail in the location shown in my picture. Mine is 9-5/8" between the narrowest point. I am trying to put the rear rack in the lower position but it is contacting the grab rail.
 

Attachments

AusTexS10

Well-Known Member
Joined
Jan 24, 2020
Messages
733
Location
Austin, TX
Can someone with a Gen2 measure the distance between the pillon grab rail in the location shown in my picture. Mine is 9-5/8" between the narrowest point. I am trying to put the rear rack in the lower position but it is contacting the grab rail.
Probably could be either Gen, I don't think that has changed. I'd do it on my Gen 1, but my Altrider rack is in the upper position and likely blocks access to this measurement.
 

Reno

Well-Known Member
Joined
Oct 6, 2021
Messages
206
Location
Colorado
Sometimes the simplest suggestions are the best. Of course, he'll have to find a security torx 50 first. Mine cane from Home Depot.
I had to move mine out a bit to fit my rotopax gas can in, simple solution
 
Top