paint colour code needed

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,625
Location
bridgend, Wales, UK
Hi guys,

need to get some touch up paint for my petrol tank the bike is a gen 1 2013 white.

under the seat there is a label with a white dot and 23PF-040 IS THIS THE COLUR CODE I NEED

ROB
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,625
Location
bridgend, Wales, UK
the sticker has a white dot with 23PF-040 and then the black dot underneath just has a B along side it

rob
 

SeaBass

Member
Joined
Aug 7, 2019
Messages
82
Location
Arlington, VA
In that case, you might be right. In 2013 there were two colors, BWC1 and MNM3(grey) so it has to be BWC1. Honda actually puts the full code on the frame under the seat.
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,625
Location
bridgend, Wales, UK

Tenman

Well-Known Member
Joined
Dec 7, 2013
Messages
2,109
Location
Natchez Ms USA
It might be, is BWC1 the code next to the black dot?
Thanx I just shattered mine front off. Softened my preload all the way and tested it on a v ditch. It'a had a fender extender for 50k miles and never snagged it on my Altrider plate. I had a zip tie on the fork to measure travel. It was still an inch form bottoming out. I shoulda used the 2 sided tape instead of screws. Until this happened I would have sworn it wouldn't hang up. $177.61 Kinda scarce
1650383261231.jpeg1650383303059.jpeg
 
Top