Long-Lines / Longer hydraulic lines

~TABASCO~

RIDE ON ADV is what I do !
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Vendor
Joined
Apr 4, 2011
Messages
7,328
Location
TEXAS
We have some info cooking and we are heading in the right direction with the long lines ! ! Hopefully some good news very soon !
 

CycleCase

New Member
Joined
Sep 24, 2021
Messages
2
I have pro taper adv high bars with 2” risers. So I probably have between 4-6” over stock. Brake and clutch lines are tight after rerouting under the trees but the throttle cables are completely maxed out and bind up when forks are turned right.
 

~TABASCO~

RIDE ON ADV is what I do !
Founding Member
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Vendor
Joined
Apr 4, 2011
Messages
7,328
Location
TEXAS
I have pro taper adv high bars with 2” risers. So I probably have between 4-6” over stock. Brake and clutch lines are tight after rerouting under the trees but the throttle cables are completely maxed out and bind up when forks are turned right.
If your able, or if you like, measure what you really need with something. I have found many times I thought I needed a certain length and it was wrong when I measured it. But no problem, anything you might need. Thanks
 

spatchcock

New Member
Joined
Oct 26, 2021
Messages
10
Location
durham, nc
good morning, I'm looking to get extended clutch and brake lines from you. how do I go about making that happen? thanks, spatchcock
 
Top