Large Caps for led Lights for Yamaha Super Tenere All Models ( More Pics ).

deftoner

On a bad day just remember: 1st Down,all rest Up.
Joined
Dec 21, 2015
Messages
344
Location
USA
Hi deftoner , if you get around Cafe 27 one of these days let me know ,I"ll meet you there and get a some caps . Thanks Jeff
Hey Jeff, long time no see :). Raining a lot here, and busy life, lot of things going on, but definitely we have to meet!! :) I will text you soon
 

deftoner

On a bad day just remember: 1st Down,all rest Up.
Joined
Dec 21, 2015
Messages
344
Location
USA
Received My caps today Blaine / Vancouver BC Canada Thanks very much !
So glad that you received them. Hope you like them. Anything you need, any doubt, comment, etc, feel free to contact me. Glad to help.

Thanks!!
 

Talltourer

Member
Joined
Aug 6, 2018
Messages
96
Location
Ottawa, Ontario
BTW, a couple coats of plastidip on the caps makes them look like damn close to OEM also, looks great now!! Very happy with the fitment.

So happy to have people deftoner this on the forum! :)
 

Wrathchild

Member
Joined
Sep 30, 2018
Messages
84
Location
Austin Texas
Super interested in this but I have a couple questions, how are the LEDs compared to stock in terms of output?
Do they have the issue that HIDs have where they have the wrong beam pattern and just blind everyone with uncontrolled light?
 

Beemermcr

New Member
Joined
Mar 18, 2018
Messages
23
Location
Sandy, UT
Super interested in this but I have a couple questions, how are the LEDs compared to stock in terms of output?
Do they have the issue that HIDs have where they have the wrong beam pattern and just blind everyone with uncontrolled light?
I just put some cheap Amazon aftermarket LEDs in - with these Caps - I got the aim wrong the first time, lighting up the roadsides and leaving a dark spot in front of the bike (yes, I have adjusted the hard-to-adjust headlight aim)! After a bit of research, and with little help from the instructions with the bulb, I figured out the 3-9 o'clock orientation of the bulb, with the block down and now have a great illumination pattern. We will see how they hold up. Caps fit and function well, with good room around the rear of the bulb/fan.
 

Wrathchild

Member
Joined
Sep 30, 2018
Messages
84
Location
Austin Texas
I just put some cheap Amazon aftermarket LEDs in - with these Caps - I got the aim wrong the first time, lighting up the roadsides and leaving a dark spot in front of the bike (yes, I have adjusted the hard-to-adjust headlight aim)! After a bit of research, and with little help from the instructions with the bulb, I figured out the 3-9 o'clock orientation of the bulb, with the block down and now have a great illumination pattern. We will see how they hold up. Caps fit and function well, with good room around the rear of the bulb/fan.
So the LED chip should face up?
 

Beemermcr

New Member
Joined
Mar 18, 2018
Messages
23
Location
Sandy, UT
So the LED chip should face up?
On the H7 bulb, there are two chips, one on each side. They should be at the 3 o'clock and 9 o'clock positions. Simply, chips face right and left, not up and down. There is a bottom cutoff (kinda like a ledge) on the prong the chips are mounted to, that should be at the bottom, not top. Sorry, don't have any pictures.
 

Wrathchild

Member
Joined
Sep 30, 2018
Messages
84
Location
Austin Texas
On the H7 bulb, there are two chips, one on each side. They should be at the 3 o'clock and 9 o'clock positions. Simply, chips face right and left, not up and down. There is a bottom cutoff (kinda like a ledge) on the prong the chips are mounted to, that should be at the bottom, not top. Sorry, don't have any pictures.
That should be plenty good for me to figure it out on my own from there :)
 

deftoner

On a bad day just remember: 1st Down,all rest Up.
Joined
Dec 21, 2015
Messages
344
Location
USA
BTW, a couple coats of plastidip on the caps makes them look like damn close to OEM also, looks great now!! Very happy with the fitment.

So happy to have people deftoner this on the forum! :)
Woww, thats a great idea :) Nobody saw it but if you take a look thru a light with the caps you can see super small holes that gives the led light a little breath, since a lot of people here seems to be worry about that. Water will no go in (unless you submerge underwater). I love that you like them, doesnt look that way, but I put a loooot of time an effort to make them great.
 

deftoner

On a bad day just remember: 1st Down,all rest Up.
Joined
Dec 21, 2015
Messages
344
Location
USA
UPDATE! :) since some people asked about it, now I have colored options for the one that want them in color.

Since color its printed on demand will take 2 days to process them (since I always have 1 or 2 pairs printed in black, but cant have all colors). I can print them in almost any basic color, like red, yellow, green, blue, pink, white, etc.
I attached an example. Prince its the same (recently I went up to 35, since material cost when up (pretty sure that was a new law in taxes from china). For people that already bought them but wants color, I have a super special discount (just charging cost and shipping).

Thanks to all, from my heart, I'm really happy every time that people like the caps :) it means a lot.
 

Attachments

deftoner

On a bad day just remember: 1st Down,all rest Up.
Joined
Dec 21, 2015
Messages
344
Location
USA
Email sent
:)

ETA PayPal sent
Shipped :) I'm moving and I have all my things in boxes, including the 3d printer, but glad that I printed some pairs just in case. Thanks!!!!
 
Top