HELP need the size of the 4 bolts that hold the 2 oen crash bars on.

[bimota]

hi guys,

anybody still have the oem crash bars fitted THE LITTLE BLACK PLASTIC BITS can anybody tell me the size of those 4 bolts please, i have the 2 bars new but no bolts more interted if the 4 are all the same lenghs please

thanks for your help

rob

 

[gunslinger_006]

I recall the givi crash bar install pdf shows the kit uses M8x20mm.

Mine are just like this (i have the givi bars) a metric cap head hex head bolt that is iirc an m8x20. I use a long hex driver to get to it.

Sent from my iPhone using Tapatalk

 

[bimota]

I recall the givi crash bar install pdf shows the kit uses M8x20mm.

Mine are just like this (i have the givi bars) a metric cap head hex head bolt that is iirc an m8x20. I use a long hex driver to get to it.

Sent from my iPhone using Tapatalk

so you think the 4 oem bolts were all m8x20 with large button heads

rob

 

[gunslinger_006]

I never had the oem bars, just the stupid plastic pieces that you remove when you install the factory bars.

Its going to be an m8.

I would just order a few in various lengths after confirming the thread pitch and see what works. I would use 316 stainless to avoid corrosion.

www.mcmaster.com

They have everything imaginable.


Sent from my iPhone using Tapatalk

 

[bimota]

I never had the oem bars, just the stupid plastic pieces that you remove when you install the factory bars.

Are you looking for the exact bolt for the oem bars, or the oem plastic guard thingys?


Sent from my iPhone using Tapatalk

yer those are the ones i,m on about the 2 plastic black bits that fit on the side

rob

 

[bimota]

the 2 small plastic bits one each side they had large button head bolts holding them on m8 i think i was woundering if the 4 were all the same lengh

rob

 

[gunslinger_006]

Then that should be easy.

Just measure the opening on them to see what size head will fit (socket head, rounded cap head, etc...) and go with that.

I believe they were all the same length?


Sent from my iPhone using Tapatalk

 

[MIKE R]

According to Fowlers

COWLING - Yamaha XT1200ZE | Yamaha XT1200ZE 2014 COWLING with fast delivery to United States | Fowlers Parts

Yamaha XT1200ZE | 2014 | Bluish white cocktail 1 | Europe | COWLING with fast delivery to United States. Available at Fowlers Parts, the UK's No.1 Motorcycle Parts Supplier.

www.fowlersparts.co.uk

The bolt is number 64 in the diagram, and has a part number of 92912-08030

Now if we look at:=

How to find Yamaha bolt sizes...

Every now and then someone asks what size a particular bolt is. Just thought it would be helpful to post this from another site. FYI, you can get the part# from most Yamaha dealer websites or here. "How to get sizes of bolts from the part numbers... The Yamaha microfiche shows the bolt size, you ...

www.venturerider.org

it explains how the bolt size is in the part number meaning that the bolt you need is M8 X 30mm

Unfortunately the pitch isn't mentioned but the photo might give you an ides

Hope this helps



Mike

 

[gunslinger_006]

Mike you rock!

I was all over tmsparts trying to find that exact diagram and failed to find one showing the cowling.


Sent from my iPhone using Tapatalk

 

[bimota]

According to Fowlers

COWLING - Yamaha XT1200ZE | Yamaha XT1200ZE 2014 COWLING with fast delivery to United States | Fowlers Parts

Yamaha XT1200ZE | 2014 | Bluish white cocktail 1 | Europe | COWLING with fast delivery to United States. Available at Fowlers Parts, the UK's No.1 Motorcycle Parts Supplier.

www.fowlersparts.co.uk

The bolt is number 64 in the diagram, and has a part number of 92912-08030

Now if we look at:=

How to find Yamaha bolt sizes...

Every now and then someone asks what size a particular bolt is. Just thought it would be helpful to post this from another site. FYI, you can get the part# from most Yamaha dealer websites or here. "How to get sizes of bolts from the part numbers... The Yamaha microfiche shows the bolt size, you ...

www.venturerider.org

it explains how the bolt size is in the part number meaning that the bolt you need is M8 X 30mm

Unfortunately the pitch isn't mentioned but the photo might give you an ides

Hope this helps

View attachment 74257View attachment 74258View attachment 74259View attachment 74260

Mike

hi mike,

i,ve been on there allready thats why i asked are the 4 the same lengh as there are 2 each side correct 64 but the other side its 67 , and no info on 67 if 64 and 67 are the same

rob

 

[MIKE R]

It appears from this link that that parts 64 and 67 are the same (same part number 08030):-

Yamaha XT1200Z 2014 Cowling - MSP

Yamaha XT1200Z 2014 Cowling - order parts in just a few clicks from Europe’s number 1 genuine spare parts online retailer

www.motorcyclespareparts.eu

Mike

 

[bimota]

thank you mike

rob

 

[Boris]

These are what are used for mounting the original crash bumpers. I kept the bumpers and fittings.

 

[Boris]

Length

 

[bimota]

Length
View attachment 74266

supeb thanks boris,

i have alot of stuff removed from my bike as well loads od bags of brackets and bolts but not labelled lol but now know what i,m looking for

thanks