Gen2 NAV Bar Stabilizers

Ladlesport

Well-Known Member
Vendor
Joined
Jun 24, 2018
Messages
221
Location
Parkland County Alberta, Canada
Just ordered a set from your eBay store!!
A simple bracketry none can get it right aesthetically as you did,
Can't wait for it to arrive in Singapore!
Wooooohhh
Your set was shipped yesterday!
Just so you know, there have been a couple international shipping delays, last one took almost 6 weeks but my pal Nuno in Portugal is very happy to finally have his as of this morning. That was the longest wait time from the 100 sets that I have shipped in last 9 months. I have seen some very good shipping times for all of them that I have sent to Singapore, its been really fast, like faster than some of the ones that I have sent to the USA. With the Holiday season over, there should not be too much of a delay.
 

Doodlefadd

Member
Joined
Dec 30, 2020
Messages
35
Location
Singapore
Your set was shipped yesterday!
Just so you know, there have been a couple international shipping delays, last one took almost 6 weeks but my pal Nuno in Portugal is very happy to finally have his as of this morning. That was the longest wait time from the 100 sets that I have shipped in last 9 months. I have seen some very good shipping times for all of them that I have sent to Singapore, its been really fast, like faster than some of the ones that I have sent to the USA. With the Holiday season over, there should not be too much of a delay.
Ohhhh goodieee! Thanks for the update, can't wait for them. Will post a pic once received and installed ☺☺☺
 

Ladlesport

Well-Known Member
Vendor
Joined
Jun 24, 2018
Messages
221
Location
Parkland County Alberta, Canada
Are these available for Gen 1 bikes?

Sent from my SM-T290 using Tapatalk
Hi @StephanSF not from me at this time, I was trying to work on these last summer but the Gen1 bikes are harder to find around where I live. Also the covid didn't help. Working on it slowly though.
With the fixed position windshield on those bikes it's not the easiest and still try to keep them economical.
 

Ladlesport

Well-Known Member
Vendor
Joined
Jun 24, 2018
Messages
221
Location
Parkland County Alberta, Canada
Still available, I went to site and said not available?

Sent from my LM-Q730 using Tapatalk
Oh snap! Thanks for your interest, I guess I missed that notification.
I actually have 2 sets on hand to cover while I make more but just noticed in our of hardware.
Everything will be back in stock for Tuesday morning mountain time.
I'll post an update.
 

Ladlesport

Well-Known Member
Vendor
Joined
Jun 24, 2018
Messages
221
Location
Parkland County Alberta, Canada
Hi I have a 2020 bike, would these fit, how much are they BUT do you know how shipping would be to the uk? Thanks.
Yes, no issues, they fit the entire gen 2 range.
Shipping to the UK is 15 CAD or less and takes about 3-4 weeks with regular airmail. You can opt for tracked shipping but that's very costly, almost the same price as the bars and hardware.
https://ladlesportadv.com/collections/all
 

Wenisgoodenuf

Well-Known Member
Joined
Jun 26, 2022
Messages
634
Location
Winnipeg
Curious in the instructions it says hand tight on the hardware. To me that is vague. How tight is tight. The rubber washers are there but there should be no movement in the bracket correct?. I tend to snug things up pretty good. Advise if ya can , thx
 

Ladlesport

Well-Known Member
Vendor
Joined
Jun 24, 2018
Messages
221
Location
Parkland County Alberta, Canada
Curious in the instructions it says hand tight on the hardware. To me that is vague. How tight is tight. The rubber washers are there but there should be no movement in the bracket correct?. I tend to snug things up pretty good. Advise if ya can , thx
Tighten the nut by hand like it's a wingnut till it stops, be sure the rubber is compressed but not completely extruded from under the washer. I have 20k+ kms on my set that were installed in April 2020 and they have never moved or backed out.
 

Wenisgoodenuf

Well-Known Member
Joined
Jun 26, 2022
Messages
634
Location
Winnipeg
Tighten the nut by hand like it's a wingnut till it stops, be sure the rubber is compressed but not completely extruded from under the washer. I have 20k+ kms on my set that were installed in April 2020 and they have never moved or backed out.
Thanks so much Ladlesport. Nice to see a fellow Canadian doin well. Ride safe
 
Top