Fenda Extenda

[MFP]

Would anyone happen to know if the Pyramid Plastics front Fenda Extenda will clear an ACD Racing Parts skid plate?

 

[Longdog Cymru]

Simple answer is “yes it will”.

 

[oldbiker]

Simple answer is “yes it will”.

Simple answer is “yes it will”.

how about rex racing ?

 

[EricV]

how about rex racing ?

The way T-Rex Racing bolts up there is very little chance that a fenda extenda would catch on anything. The only protrusion is the oil filter bump. Nothing is impossible, given the right circumstances, but it seems unlikely.

 

[oldbiker]

The way T-Rex Racing bolts up there is very little chance that a fenda extenda would catch on anything. The only protrusion is the oil filter bump. Nothing is impossible, given the right circumstances, but it seems unlikely.

thanks Erick !!!!!

 

[Thrasherg]

I have both the T-rex sump guard and the Pyramid extender and there is no clearance issue at all.

Gary

 

[Bigbore4]

@EricV How about the Rumbux? Do the extenders get hung on it? I never thought to recheck after I changed protection.

TIA Dave

 

[MFP]

Simple answer is “yes it will”.

Thanks.
Is there a difficult answer?

 

[Thrasherg]

Yes, but he has to kill you after he has told you.. So go with the simple answer!!

 

[MFP]

Yes, but he has to kill you after he has told you.. So go with the simple answer!!

I am an immortal being.

 

[Longdog Cymru]

I am an immortal being.

 

[dhague]

how about with sw motech skidplate?

 

[EricV]

@EricV How about the Rumbux? Do the extenders get hung on it? I never thought to recheck after I changed protection.

TIA Dave

On the Full Spec kits, yes, at full fork compression you will catch a Fenda Extenda. I snapped off a good chunk of the back of my fender that way. I have a warning on the vendor threads about it on the first pages. This was my bike in Death Valley, CA trying to keep up with the studs on their 650s. Bent the rim with the same impact and turned around to limp back to the pavement after this shot.

HERE

 

[EricV]

I am an immortal being.

We always suspected as much.

 

[EricV]

how about with sw motech skidplate?

I don't know for sure. It has a little bend at the top in front to help, but I suspect that like the Rumbux, with a big hit, it will catch. It went over the 1" diameter bar on the Rumbux, I don't think that lip is enough to prevent it on a full compression hit. Hopefully someone that has the set up and has ridden off pavement hard will speak up with their direct experience.

 

[MFP]

how about with sw motech skidplate?

This is from ADV DEPOT's website regarding the Pyramid Plastics Fenda Extenda for the Super Tenere:

*Fenda Extenda fender extensions are manufactured by Pyramid Plastics and attach to your bike's original fender by drilling four holes in the guard and using the screws provided. They fit neatly onto the mudguard to provide extra protection for the radiator and engine from road grit and gravel kicked up by the front tire.
Note: Do not install this item with the SW-Motech Skid Plate. Upon heavy compression this item can become lodged in the plate and cause damage to the front fender.

 

[oldbiker]

I have both the T-rex sump guard and the Pyramid extender and there is no clearance issue at all.

Gary

thanks gary

 

[DamMechanic]

I know first hand that the extender does not clear the Hepco Becker.