Code 36 and low idle/barely runs after maintenance

Fastring

Member
Joined
Sep 28, 2018
Messages
42
Location
Georgia
Issue: Bike is showing "36" code and engine light, runs rough/barely starts, wont idle.
Before: Was fine, I did maintenance consisting of: changing air filter and spark plugs. Also added an electrical connection onto the existing PC8 beaver distribution box thing.
Troubleshooting: read into how to clear codes and the number you are supposed to stop on (63 or close to that) displays 00 instead of what I expected (either 1 for # of codes or "36" for what is displayed at start up).

#36 appears to be "primary diagnosis of the injector nozzle 1". Thoughts? I was going to remove the tank and verify I had everything I touched connected but figured I'd ask others first.
 

Fastring

Member
Joined
Sep 28, 2018
Messages
42
Location
Georgia
Wow! Thanks! Let me go check those connections! What is that from? Is that a manual I can purchase somewhere?
 

Boris

Well-Known Member
Joined
Dec 21, 2013
Messages
2,051
Location
midlands. UK
It’s from the full Yamaha Service Manual. I’m pretty sure you can get it from a Yamaha dealer.
 
Top