Anyone parting out an XT1200Z , 2012 or newer ?

Newhoco

New Member
Joined
Feb 7, 2019
Messages
16
Location
Newmarket , Ontario .
I just found out that my new-to-me 2017 Super Tenere needs the rear caliper carrier . ( Insert curses here ) . It's the part the rear axle passes through , and the torque rod attaches to .

As I was re-installing the wheels with new Mitas E07 tires , a screeching noise was coming from the rear brake as I spun the wheel by hand . Upon investigation , part of the casting in which the brake pads slide is broken away . Blasted PO must have known , as the pads have obviously been in and out previously .

The entire rear caliper assembly is shown as Yamaha part # 23p-2580w-00 , which includes the part I need , as well as the caliper itself , which I don't need , and sells for about $250.00 USD . I haven't checked with a Yamaha dealer in Canada yet , but it'll probably cost $500.00 CDN for the whole kit .( More cursing here ) .

Any suggestions ?

Alex .
 

SparrowHawkxx

Active Member
Joined
Dec 9, 2012
Messages
203
Location
Oklahoma
Search (rear caliper super tenere) for salvage parts on ebay.
They are calling this a "Rear Brake Caliper Mount Bracket".

There are 2 or 3 of these now showing for both 2012 and 2013 bikes.
some include the shipping in the price some don't but either way they are about $30 USD including shipping.

I checked the part number for the assembly on my 2013 and for a 2017, they are both 23P-2580W-00-00.

I replaced a front caliper on my VSrom with a ebay purchase. I had to clean it up some but other than that it was in good shape.
Check out the rating on the seller, then just find one with the color that best matches and look at the pictures closely to evaluate the condition the best you can.
 

EricV

Riding, farkling, riding...
2011 Site Supporter
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
May 22, 2011
Messages
8,227
Location
Tupelo, MS
I have one of these, in excellent condition. PM coming your way.
 

Buelligan

Active Member
2012 Site Supporter
2013 Site Supporter
2014 Site Supporter
Joined
Dec 21, 2011
Messages
523
Location
Albuquerque
I have a complete rear caliper assembly and mountIMG_1837.JPGIMG_1837.JPG
 

Newhoco

New Member
Joined
Feb 7, 2019
Messages
16
Location
Newmarket , Ontario .
Thanks guys ! I have purchased EricV's part , and will meet up with it at the Iron Horse rally .

Now , anybody got a set of winglets to spare , cheap ?

/Alex .
 
Top