Gigitt
Active Member
Added Green LED strips from eBay to the side of my 2015 Yamaha Super Tenere 1200 instrument cluster as my GPS was blocking the standard turn indicator lights. GPS too high then I cannot lower the screen as it hits the Touratech cage. Lower the GPS and cannot see the turn indicator at top of cluster.
The LED strips are too bright for direct viewing, but side mounting the reflections are perfect easily seen in daylight and not blinding at night.
They asos fit nicely at the side of the cluster making for a clean finish.
The LED Strips were soldered to the connector end of the LED turn signals.
You need to take the headlight out then pull the turn signal wiring forward.
Unwrap the cables to lay the LED cable.
Tape up the remaining length of cable from the LED Strip.
I used good quality Nito electrical tape.
Enjoy
RHS does have 4 LED's, just cannot see it in video
The LED strips are too bright for direct viewing, but side mounting the reflections are perfect easily seen in daylight and not blinding at night.
They asos fit nicely at the side of the cluster making for a clean finish.
The LED Strips were soldered to the connector end of the LED turn signals.
You need to take the headlight out then pull the turn signal wiring forward.
Unwrap the cables to lay the LED cable.
Tape up the remaining length of cable from the LED Strip.
I used good quality Nito electrical tape.
Enjoy
RHS does have 4 LED's, just cannot see it in video