Accessories Wiring.

Alien1200

New Member
Joined
Sep 22, 2020
Messages
20
Location
UK
Hi,

I have been told there are a number of accessories wiring points already on the xt1200. Is the correct, if so does anyone have pictures or diagrams showing where this is?

Thanks in advance.
Allen
 

bimota

Moderator
Staff member
Global Moderator
Joined
Dec 10, 2017
Messages
6,624
Location
bridgend, Wales, UK
yes 2 here we are

rob
 

Boris

Well-Known Member
Joined
Dec 21, 2013
Messages
2,077
Location
midlands. UK
This is located behind the right hand side panel, sort of tool kit area. You might have to dig about a little. It’s there on all models.
CF7217AC-E7D1-48DA-90F9-0F30C57EAA5A.png
 

outdoor

Active Member
Joined
Jan 13, 2023
Messages
102
Location
Ottawa, Canada
Here is the diagram i've used for my plug and play extension wiring

It powers the LED aux fog lights (by relay and illuminated switch), GPS and a USB plug

View attachment 71579

View attachment 71580
where did you get all the connectors? I do not see where the connections go to USB/GPS?? The wire on bottom is the lights to the 2 - 2pin to the 4 pin on left. That plugs into a relay?
I cannot make out the other 6 pin and 2- 3 pin,fuses. Where to these connections connect to on the bike?
 

Fennellg

Well-Known Member
Joined
Jun 28, 2015
Messages
611
Location
North Carolina
If you go eastern beaver. It’s plug and play. Hook up to the battery, plug into that white aux light plug. Then mount unit to your taste.

Advantages. 1. 30 min job
2. Plug and play no splicing or taping line
3. Room for expansion
4. Switched and non switched circuits. ( you decide if you want power to an accessory when the bike is off)
5. Adding or changing accessories just got a lot easier.

B5F866C7-998B-4780-85EC-D61B30F772C2.png
 
Top