3D Printed

[ThaiXT]

Hi all I am printing a few parts for testing, a tool for headstock bearing as attached pictures I can produce 3/4 or 1/2 drive these are printed out of very tough pla and are sun heat resistant.

Also an adaptor ring for the headlights which gives an extra 20mm bulb Clarence which I'm hoping to print today.

Once tested I will come back to give feed back cheers

 

[Panman]

That's a nice tool!

 

[ThaiXT]

Headlamp spacer ring printed and works great let me know your thoughts, attached photos thanks all

 

[Tenman]

The notches and the tabs that lock it on look rough

 

[ThaiXT]

The notches and the tabs that lock it on look rough

Difficult to print it as it needs supporting while printed, it's functional although I have reduced it to 14mm spacer as it was catching the forks on lock to lock steering

 

[WJBertrand]

Nice work! Are you planning to make the headstock tool available? Can you make one with 3/8ths inch drive?


Sent from my iPhone using Tapatalk Pro

 

[ThaiXT]

Nice work! Are you planning to make the headstock tool available? Can you make one with 3/8ths inch drive?


Sent from my iPhone using Tapatalk Pro

Hi the tool failed so I am redesigning it with a 19mm hex on top so any torque wrench with 19mm socket will fit, this will be much stronger, once I get it working ok yes I could possibly sell