2015-2017 Super tenere 1200 indicators

[Thrasherg]

gentlemen, I just bought a new super tenere and my wife bought a new FZ07, the indicators on the FZ are huge and ugly, I would really like to fit the indicators from my tenere to her bike, they will fit, but the set of 4 from Yamaha is more than $300!! Anyone know where I can get a set at a more reasonable price? I know I will have to swap the flasher relay as the Tenere bulbs are LED and the FZ uses old incandescent bulbs, I could buy after market indicators but they all have the wrong mounting (a large single bolt) and I would like to fit some indicators that will fit straight into the FZ bodywork and not leave holes.

Thanks Gary

 

[gunner]

I have these on my 2012, nice and bright, sturdy and well made.

https://www.cyclegear.com/parts/speedmetal-led-arrow-turn-signals

Use these adapters for the opening in the body work.

https://www.revzilla.com/motorcycle/oxford-indicator-spacers

Cycle Gear also carries them.

Steve

 

[Don in Lodi]

If they're LED you'll need a different flasher relay as well. ::008::

 

[Checkswrecks]

Gen2 (2014+) are all LED.

 

[Thrasherg]

Use these adapters for the opening in the body work.

https://www.revzilla.com/motorcycle/oxford-indicator-spacers

Cycle Gear also carries them.

Steve

Steve, When I look at the WEB site they list about 10 different versions of the adapters, but the fitting table doesn't list a super tenere or an FZ07, so do you know which one I need front and rear?

Thanks Gary

 

[Checkswrecks]

My experience is that for most of the aftermarket indicators, you need to cut off and install new bullet connectors. Just keep the polarity right and it's only 2 wires.

 

[gunner]

Steve, When I look at the WEB site they list about 10 different versions of the adapters, but the fitting table doesn't list a super tenere or an FZ07, so do you know which one I need front and rear?

Thanks Gary

I looked at my order history and I ordered the OF869 spacers. I used the template guide from the Oxford web page to figure out which spacer worked on my bike. The template is attached below.

 

[Blkfd3s]

I have two rears from a 2016 R1. Which I believe are the same. Look the same and are LED. I’ll get rid of them for $75 shipped. Let me know if you are interested.

 

[Thrasherg]

Many thanks but a few weeks ago I found some imitation LED indicators on eBay that are exactly the same as Yamaha’s, same base mounting, have the weird round connectors for $25 a pair. They fitted great and look superb, don’t know how long they will last but very happy with them so far. They are only the 2 wire (rear) Version so they don’t light up as side lights when riding, but I can live with that.

Gary