2012 LED front flasher

[patrickg450]

Drawing a blank here.......I have changed out the bulbs in the OEM front flashers. Now that the rubber has broken on them I want to do a full swap out to LEDs on the front. I thought there was a good thread on this topic but I did not see what I was looking for.


2012 need part number to swap out to LEDs on the front.

 

[AusTexS10]

Drawing a blank here.......I have changed out the bulbs in the OEM front flashers. Now that the rubber has broken on them I want to do a full swap out to LEDs on the front. I thought there was a good thread on this topic but I did not see what I was looking for.


2012 need part number to swap out to LEDs on the front.

I know there is something in here on that. Basically, you'll need three things: new light stalks, adapter plates for the big holes MamaYama put in and a replacement flasher relay made for LEDs.

 

[AusTexS10]

Drawing a blank here.......I have changed out the bulbs in the OEM front flashers. Now that the rubber has broken on them I want to do a full swap out to LEDs on the front. I thought there was a good thread on this topic but I did not see what I was looking for.


2012 need part number to swap out to LEDs on the front.

I'm thinking the discussion I recall may have been over in a Facebook Super T group. There were several links provided to led light stalks listed on Amazon.

 

[patrickg450]

really.....

 

[Cycledude]

What is it that your expecting to gain by switching turn signals to LED ?

 

[bimota]

i know you can buy loads of cheap led indicators for our bikes but i know a few guys that swopped out the gen 1 indicators for the gen 2 led ones
they come up on ebay alot so they just waited for a set

rob

 

[bimota]

I fitted these led indicators with running lights and brake lights 5 years ago

Genuine Yamaha LED Flashers Plus version ,Front and Rear indicators IN STOCK !! | eBay

Stylish front flashers with integrated position light. combined with the LED Flashers Plus Rear. Stylish rear flashers with integrated position light. the other wires are positive feed to operate the corresponding light colour either orange red or white dependant on front or rear.

www.ebay.co.uk

rob

 

[patrickg450]

What is it that your expecting to gain by switching turn signals to LED ?

the rubber has deteriorated on the one, I am using a hose clamp and elect tape to keep it in place. Why install older ones when I can have new LEDs.

 

[Sierra1]

I fitted these led indicators with running lights and brake lights 5 years ago

Genuine Yamaha LED Flashers Plus version ,Front and Rear indicators IN STOCK !! | eBay

Stylish front flashers with integrated position light. combined with the LED Flashers Plus Rear. Stylish rear flashers with integrated position light. the other wires are positive feed to operate the corresponding light colour either orange red or white dependant on front or rear.

www.ebay.co.uk

rob

Are those sequential? I thought I remembered someone having some that were.

 

[bimota]

Are those sequential? I thought I remembered someone having some that were.

lol what does sequential mean

they are basically FRONT are white led running lights that have indicators built in, REAR are red running lights, extra brake lights plus the indicators

rob

 

[Sierra1]

lol what does sequential mean. . . .

At about 6:00 they will show both types. If you remember the old Mercury Cougar's rear signals.

 

[Sierra1]

lol what does sequential mean . . . .

So, I'm guessing it wasn't you.

 

[bimota]

So, I'm guessing it wasn't you.

lol NO

 

[bimota]

i do remember seeing the indicators you are talking about tho, there are a few cheap sets on ebay that do that

rob

 

[bimota]

possibly here

Sequential LED kit

Saw this and thought it may be of interest, https://www.ledperf.co.uk/sequential-led-indicators-for-yamaha-xt-1200-z-super-tenere-p-37007.html

yamahasupertenere.com

rob

 

[Sierra1]

possibly here

Sequential LED kit

Saw this and thought it may be of interest, https://www.ledperf.co.uk/sequential-led-indicators-for-yamaha-xt-1200-z-super-tenere-p-37007.html

yamahasupertenere.com

rob

Yup, that's the one. I knew it was one of you guys from Wales. I wasn't paying close enough attention. I remembered him posting, and you installing. It just wasn't these that got installed. And with as much love that you give your beauty queen, I figured you'd have them.

 

[gunner]

Patrick,

Here is what I replaced my turn signals with:

Speedmetal LED Arrow Turn Signals - RevZilla

Shop RevZilla for your Speedmetal LED Arrow Turn Signals today! Free Shipping, Lowest Price Guaranteed & Top of the Line Expert Service.

www.revzilla.com

and you will need these spacers:

Oxford Indicator Spacers - RevZilla

Covers holes left by standard sized indicators in bodywork. To select the appropriate spacer for your bike please use the below Fit Chart, then select…

www.revzilla.com

Model OF869

I'll email you a video of how they look.

 

[2aroundtheworld]

Both my flasher rubbers broke on my 2012. I think it's just a matter of time before they all do it.

I have a 2017 WR250R and we swapped the flashers already. I kept the old ones as they look identical to the Gen 1 Super Tenere. I am going to try these tomorrow.