Search results

Drill a small hole in the ally socket and one on the side, fill the hole with grease and insert an Allen key to pump in, no need to undo the bolt and loctite. Hope this helps

Hi folks Would anyone know the correct sizes for banjo bolts and bleed nipples ,I’ve done some research what I found but I’m not a 100% Banjo bolts are M10x1.25 (Double&single) front. Banjo bolt are M10x1.25 rear Bleed nipple front M8x1.25 Can’t find size for clutch or rear brake .

Hi folks just wonder when you change the engine oil ? I like to change around the 6-7 KM mark and oil filter every 2nd oil change though I’ll remove it every oil change and leave upside down overnight. I’m at 180000km and going strong In Scotland at the moment,beautiful spot

Hi folks Just wondering what the best oil weight for a single rider with luggage, im rebuilding the forks at the moment.

Hi Folks just wondering if the clutch basket is worth upgrading to the gen.2,I seem to notice the 3-3.5 RPM vibrations are getting worse.

Hi Folks just a quick question,can I remove the clutch cover on the side stand without removing the oil

Hi folks just thinking of replacing my main halogen bulbs for LED,I see they have a direct replacement (size wise). Any information would help.

Hi Folks, A quick question. Yam 2020 XTZ1200ZE,when stationed at the lights and your in 3rd gear the bike won’t shift down without moving,I’ve a 2012 bike and I can shift down to the bottom and up 1 to Neutral. Any recommendations to fix this. Thanks

Hi Folks Just wondering what mileage riders are replacing the clutch at,i know different factors of riding styles are a factor so im just looking for a average. my bike has 160000km-2012 G1 Paul

Hi Folks, Just giving you an update on the new TFX Suspenion,I wanted to put some miles up first before given an honest review if its worth the upgrade/money or not. The bike is a 2012 super ten.with a 160.000km,i live in Ireland with bad roads,Ive traveled up to Norway 3 times direct loaded...

Hi folks, Just looking for some advice on suspension,my 150000km 2012 stock suspension is bottoming out so I’m going to replace it,I’m torn between Ohlins and TFX,they are the same price,both look good. regards Paul

Hi folks, I have a 2012 standard setup,I’m recently noticing the rear suspension bottoming out,I adjusted the suspension and checked tyre pressure and it’s fine. I’m thinking that the rear suspension needs a service I religiously do my fork rebuilds every two years but done nothing to the rear...

Hi folks just ordered a healtech gear selector for a yam 2012,do you know if it comes with connector harness or do I need to splice into the cables at the ECU

Hi folks, Just a quick question,I’m riding a super10 2012 with 140.000km just wondering if a ECU flash is worth getting done.

Any thoughts on EBC organic pads on the rear,I ordered double H for front and rear unfortunately I received organic for the rear.

Hi folks, Just changed out my corroded headder bracket with stainless steel I think a job worth doing.

Hi Folks,I’m looking to replace my stock headder (only)with Arrow exhaust,the spec. shows a couple more horse power also no cat.converter just wondering if the gains are worth it

Hi Folks,just completed a full fork rebuild,the last time it was done was 2 years ago,I’ve changed the weight to 7.5W and couldn’t be happier.

Any recommendations what weight oil to use,I know OEM is close to a 5W but over time viscosity will drop so would I be better off on a 10W oil,I ride in road,any thoughts on this . Thanks folks.

Hi folks, Anybody know the size of the steering head bearings for yam ten 2012. I’m getting a slight notch,looking to get SKF