Search results

  1. cycledelic relic

    Tool pouch

    Since my Givi side racks are the quick release type....I hadta come up with a different solution for tool storage.
  2. cycledelic relic

    Tool pouch

    Ive posted this info before in a different thread about the rear rack... space underneath. Since all the electrical components are located under the right side panel....I decided to move the tool pouch & put a set of battery jumper cables in its place. I had a rear rack mount custom made to...
  3. cycledelic relic

    KNIGHT DESIGN LOWERED RIDER PEGS

    If anyone is interested in buying these.... I have a set in similar condition but with the cleated surfaces instead of the rubber. I would be interested in swapping the cleats for the rubbers even up. Either one is avail new for $55 from Knight so a swap would save the cost....well cept for a...
  4. cycledelic relic

    SOLD: Galfer Front & Rear Brake Pads all Super Tenere XT1200Z

    Sold Send me a pm to discuss any pymt details
  5. cycledelic relic

    SOLD: Galfer Front & Rear Brake Pads all Super Tenere XT1200Z

    have a complete 3 pair set of semi sintered Galfer pads to fit all Super Tenere XT1200Z models for $60 + $10 to ship if needed Front FD178G1054 = to EBC FA380V Rear FD295G1054 = to EBC FA319/2 These will also fit many other Yamaha models...but you need to check fit
  6. cycledelic relic

    Mouse damage-need help identifying proper harness

    Code 30.....no start.....I wonder why?? This mabe....... There was a ton of chewed up paper nesting in the MouseMotorhome under the rear seat. I cleared out most of it before this pic. Evidently...the lean angle sensor wiring was blocking the rodents hallway. I had let the Ten sit for a...
  7. cycledelic relic

    So...what other bikes do you own?

    Hey Boris I like the 14up Strom 1000s cuz theyre more "sporty" feelin than the Ten & appx 75lbs lighter too. Its my hotrod The Ten is the traveller with cruise & the shaft. More comfy too The Ten also goes slightly further on a tank (5.3gal vs 6.1 on Ten) Ten mpg is slightly better too. Ive...
  8. cycledelic relic

    So...what other bikes do you own?

    These 2 Stroms are in my garage rite now....along with the Ten 2014 Strom 1000 #2 w 10k ( I sold the 1st 2014 at 30k) & a 2013 650 Strom w 12k (I had a 2012 650 in 2016..soon after buying my 1st Tenere....a 2013 white one Im now on Tenere #3....a 2014 blue one Bought in 2019 with 10k...now has 30k
  9. cycledelic relic

    FS: NEW Sargent World Sport Seats 2019-20 Tracer 900

    Is there anyone who needs some seats??
  10. cycledelic relic

    SOLD: New CruzTools Metric Econokit M1 Toolkit

    Apparently not....it sold on Stromtrooper
  11. cycledelic relic

    SOLD: New CruzTools Metric Econokit M1 Toolkit

    This is a brand new in the box Cruze Tools Econo Kit Metric. A pretty complete kit in a zip up carry bag....not much larger that a stock toolkit. Even includes a red shop towel zip ties & elect tape $50 shipped from Waco Tx to US 48
  12. cycledelic relic

    SW-Motech luggage plate (monolock or monokey?)

    Monolock also has a smaller "cheese wedge" latch catch on the plate
  13. cycledelic relic

    SW-Motech luggage plate (monolock or monokey?)

    To the best of my knowledge....Givi only offers the Monolock style plates in plastic MM...M5M...M6M & Z113C2 The Monokey versions of these plastic plates are... M3...M5...M6 & E251
  14. cycledelic relic

    Custom paint?

    Different decals can really change a bikes personna
  15. cycledelic relic

    What you did to your Tenere today??!!

    My use really depends on where Im ridin If its the superslab.... (FM/RM & larger roads) the cruise is nice But on the lil paved goatpaths....not 2much
  16. cycledelic relic

    What you did to your Tenere today??!!

    I jus bought a Rostra for the 1000 Strom... Got used to havin it on the 14 Ten...so the Strom is next up
  17. cycledelic relic

    Help identifying bar risers

    Heres my idea..... I have previously had those same riser blocks from Turkey....& installed extra washers between the upper fork clamp & stock risers to lessen the flex. But I wanted to move the bars back justa bit....not higher though.....so.... A set of V Strom risers (much shorter) & a set...
  18. cycledelic relic

    Saddleman Seat ( Christchurch NZ )

    That would be a Saddleman....not a Sargent seat
  19. cycledelic relic

    Wanted: good quality rigid stems.

    Ive used this style of valve stem on several bikes with no problems over the last 9-10 years 45° chrome on ebay for example... listing # 141545378564 60° with shorter stem 121546763618 90° angle 131558552133
  20. cycledelic relic

    Ideas on what to do with this space?

    Only changes Ive made.... I liked the Pelican....but the moulded foam Caseling works even better. I can now fit my emerg battery inside too. Ive thought about switching top plates....but the M3 fits perfectly...& is smooth underneath so case slides easily.... & it mounts with 2 8mm bolts...
Top