Search results

ok thanks, I did removed it and it fly on the garage floor about 8 feet !

Ok thanks.

Thanks ! Yes for the cap reservoir what is the last number meaning ? I mesure the length of the screw and it look like 15 or 16 mm.

For my Super Tenere, I strip my 2 screws on the reservoir master cylinder assembly for the front brake. I would like to change it with stainless steel Allen key screws Or other kind of regular screws.

2 OEM original softs bags going inside rigids pannier, number YAMAHA, 11D-FSCIB-00-00. 200 $ CAN, plus shipping.

I did rise my handlebar with risers from Allie Express. 22$ and I took off The small plastic caps on my 4 bolts of the handlebar. I don’t have a lot of nail to took it out so I used a small flat head screwdriver . happy of my mods.

I will try that , a plastic wedge. I don’t have long nails…:p

how can i removed the caps on the handle bar ?

Did you sold your Corbin seat ?

Did not know that I. An level my super Tenere 2019 seat . What an improvement! thanks Fennellg ! love this mod.

I have some to sale. Plastic one or aluminium.

Hello everyone. I did make at a machin shop, new latches lock for my OEM side and top case. I spend 400 $ for scanning the original latch on the "CNC machin tool". I bought a aluminium plate 1/2 in thick (around 126$). They made me 8 of these latches with the CNC Machin, cost about 250$. I keep...

Cans we change a AGM battery for Lithium battery with no problem ? the alternator will charge-it ?

I went to a machine shop, specialized in repairing strip bolts on motobike. He lift the bike on a table and retap the thread to the next bigger size and he put a new bigger oil plug. He pull out the oil first and put new fresh oil after. cost 150$ for the labor time and that it.

Ok did it on the main post…

Hello every body. I broke my left side case by going between 2 cars an the left side cade get caught by the Front tire. the holding bracket is broken. But the rest of the parts are ok. i bought a new one front a local store in Québec, Canada. I paid 400 $ for it bran new. It was grey and my...

that is a great ideal !

I went to a machine shop near by and the owner make new 14 mm treads on my oil pan (made from aluminium) to fit a bigger plug. He did this on my bike directly on his working table . Wow what a nice job. For 150$…

I know that the SAE 20w50, Yamaha Lube, is the original oil type to used. But is there something else instead of YAMAHA LUBE and the 20w50 ? 10 w 40 is it all right ?

it is 541$ in Canadian money ! Outch ! plus labor 2 hours.