Recent content by rstrom

bike on center stand, lever under rear wheel. I used large crowbar and small wood block. When sweet spot found the bolts will slide out easily. remove rear link bolt first keep spacer in place. The pressure will now be off the front bolt so slide it with the link untill it contacks the exhaust...

I will take the one that will fit the s10 with jessee 10s on

Hi Wally, Tell us how you like to camp. What services you want, restaurants and shopping important nearby? Remote or near the action? How much time will you have to spend in the area? The town of Medora is must see as is the medora musical. I know most of the campgrounds in the area and have...

Glad everything worked out well. I do not have the links on at this time as i just got used to the s10 height and did not have the side stand cut down. I see a russel seat in my future and may need to put them back on. How much did you cut off the side stand to make it sit right? Thanks

TR nat park has 3 seperate units. The south unit at medora, the north unit south of watford city. and in the middle the elkhorn ranch unit which is smaller with long gravel road to it. None of the campgrounds in the park have showers but for 3 bucks the campground in medora can be used. There is...

The links on the es are different than the non es model as in different lengths. I got the lust racing links for es, they come in two versions 15 mm and 30 mm lowering. The 30mm links I got are 5 inches from center to center. Hope that helps

I think I need to clarify my post some. Remove the rear link bolt,I moved the front link bolt out to the exhaust contact then reach little finger in and moved bushing over enough to get ahold of on the right. I pulled mine out 3/4 of the way out. With that thick bushing out of the way I had no...

The trick to get that bolt out is to slide the spacer on the rear link bolt in towards the right . When this is done it gives enough space for the bolt near the exhaust to clear.