Kruzzin5's latest activity
-
Kruzzin5 replied to the thread Lower steering bearing removal.Mine are also original at 100,000…….Kilometres. :p -
Buddies bike he bought at 56k, currently over 70k. I'm sure they were original. Don't know if they were ever serviced, but it did not...
-
Kruzzin5 replied to the thread Lower steering bearing removal.are those original bearings that you replaced? What was the mileage on them?
-
Since some projects never seem to actually be done. Here's an addition to my motorcycle/automotive toolbox dolly from way back on post...
-
The first thing to mention is that "shorty" levers will affect the braking feel and force required to apply them. You will have to use...
-
Brakes on both of my Tenere’s have been excellent. When the 2018 was brandnew the brakes didn’t seem to work as well as the previous...
-
Kruzzin5 reacted to ~TABASCO~'s post in the thread Power band flat between 3k to 4k after valve clearance adjustment. with
Like.
Once you adjusted the valves, and you had the cams back installed, did you go back and "check the valve clearance" again to double check... -
I had something somewhat similar years ago... I fell in the mud with a slow tip over. Mud was all jammed between the crash bars and...
-
It happens. I came to realize it really wasn’t that bad. People pull the camshafts all the time to adjust valve shims or replace the cam...
-
There is wind noise and conductive noise. Conductive noise is when you hear what's hitting the helmet's shell loudly. If you tap on...
-
-
Unfortunately oil company sales people have many folks wasting a LOT of oil by simply changing way more often than necessary, believe it...
-
I bought this red 2015 ES in Florida, nicely equipped with oem panniers, vstream shield, Sargent seat, Altrider engine guards, Akrapovic...
-
Kruzzin5 reacted to klingklang's post in the thread Found a new life for my very old 8in tablet with Like.
It is an old Samsung 8in tablet. Found a watertight case that I’ve modified and a few 3d printed parts. I really like the big GPS map.
-
No, but I did swap the OEM hose clamp for a worm type one. It's easier to get a socket with extension in there to tighten it than a...